Hi guys, could you update the ME region of this HP 440 G3 BIOS? I have cleared the Me region but it still doesn't work, thanks
-
Hi guys, could you update the ME region of this HP 440 G3 BIOS? I have cleared the Me region but it still doesn't work, thanks
-
Hi,
Try this -
thank you
Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
SN: 5CD6043VM8
I already reprogrammed with the bios that they published but a warning appears "warning the machine is not in confirmation state" I deactivated the secure boot but it does not load, the system turns on and off.Comment
-
Hello friend, I programmed the bios and it gave me an image but I got an alert "warning machine is not in committed state"
I don't know how to solve it. I was trying to solve it with Intel System Me Tool but I haven't been able to.
model: HP 440 G3 DAX61CMB6D1 REV D
SN: 5CD6043VM8
Attached FilesComment
-
-
Comment
-
Hi, try this file. Here is your DMI in case you need to program in BIOS.
SerialNumber:5CD6043VM8
ProductConfigurationID:L6D82AV
Board CT Number:PFMKH058J9Z149
ProductName:HP ProBook 430 G3
BuildID:15WWR4BW601#SUUW#DUUW
FeatureByte:3X47676J6S6Z6b7J7M7Q7W7saBapaqawbhcAdUeh.3AAttached FilesComment
-
-
thank you bro , The "warnin machine..." alert keeps appearing but if you let me install the system, thank you very much
Comment
-
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Update bios EFCN58WW to EFCN59WW for solving The Connected AC adapter has a lower wattage than the recommended AC adapter
I have a Lenovo Legion 5 15imh05a device that I bought used online. It came with a 20V 8.5A 170W charger.
The BIOS version is EFCN58WW.
When I turn on the device, it displays the message:
"The Connected AC adapter has a lower wattage than the recommended AC adapter..."
The device rarely charges the battery, and even when it does, it doesn't show that it's charging.
I've tried
...07-29-2024, 10:32 AM -
Hello everybody!
To put you in context I recently replaced the battery from my HP Pavilion 15 bc400ns with a used one, everything was going good. The same day, I decided to update the BIOS, everything went good. The thing occurred after I let the battery drain iddling on Windows 11 for the second time to calibrate it that the screen did not turn on again, the computer was on but the screen did not turn, like it would not wake from hibernation. I decided to restart the computer but got no video.
The thing is that I had installed TeamViewer and could log into the computer... -
Hi all
Anyone come across this issue where a BIOS flash will only part complete?
It will update the system BIOS and Primary EC BIOS fine but fails to update the Intel TBT Retimer, Intel TBT Retimer 2 and ME Firmware.
NVMe m.2 drive isnt detected in the BIOS, but you can get into the BIOS fine and it all works in there as intended.
The drive works fine in another laptop.
Link to a video I made of what its doing here:
Any ideas on how to overcome this?
Cheers... -
Hello,
Many thanks for the high quality ressources available on your website.
I'm currently facing some issues with my T470S:
- I sat a Supervisor Password using special chars which was causing issues
- Access to BIOS was locked but I was still able to use my PC
2 weeks ago, I got an update of BIOS/TPM from Windows Update.
Computer restarted and after Lenovo logo a loading bar appeared and at the end something went wrong + an error popped.
Computer restarted one more time and I got the prompt for typing Bitlocker...
Comment