Want to confirm it's not a problem with BIOS first.
-
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Thank you vvacl!Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
i can't not read this file after extractedComment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
rename it to .bin or .romComment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Perfect. It solved my problem with the bios. Thanks for all.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Hello dj_ricoh, I don't remember, I solved it a long time ago, thanks for the concern though.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
I`m asking because I got 5 notebooks like yours that power up for 1-2 sec then goes off.
that's why I ask. ofc I don`t have bga station to reball the chipset. I only did a reflow but nothing. the weird problem is that its showing that its almost starting. bios crystal fets SIO everything show that almost start but something its shuting it downJust cook it! It's already broken.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
dj> just check for short on powerswitched rails and u will find your problemComment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
sorry I`m still learning every day.
what do you mean powerswitched rails? a hint? should I take coils down and see where is the short?
if you manage to fix one, a good hint will be to tell me what did you find bad in yours!Last edited by dj_ricoh; 06-28-2014, 01:11 AM.Just cook it! It's already broken.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
just check for shorts on big coils. mostly it is bad chip. after unsolder coil u will be for sure which side is shorted. next unsolder chip and chceck for short on pins.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
I'm sorry, but I don't really remember, anything I do over 2 days is out of my mind.Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
tested .. good 100% workingComment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Hello, i have a question... i´m new flashing bios and i see that the size of the rom is 8.4mb while the bios chip capacity is 8mb, i understand de this file contains the bios and ec data? hod do i split it so i can copy only the bios? best regards!Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Hello, i have a question... i´m new flashing bios and i see that the size of the rom is 8.4mb while the bios chip capacity is 8mb, i understand de this file contains the bios and ec data? hod do i split it so i can copy only the bios? best regards!Comment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
MBX-268 with DDR will shutdown after 1 to 2 seconds. no DDR will not shutdown. I've reball HM. but the situation has not changedComment
-
Re: Need [BIOS dump] for a DA0HK6MB6G0 or MBX-268 Rev. G (SVE14125CLB)
Thank you for this dump, it's working but i can't access bios/assist button dont work.
If someone have another one please send/post it.Comment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM
Comment