Hello friends... Do you have new idea, for what device or tools,, good to use for macbook a2251 activation lock.. It is T2 or maybe newest,, may i ask if theres like ch431,, ezp,,, etc.. New device to buy to solve activayion lock for t2 chips
-
-
There's quite a few threads on here for removing activation lock on T2 MacBooks.
If it's been fairly recently updated to a recent BridgeOS, you may be out of luck.
There are paid services to bypass the activation lock. -
I HAVE THE BRIDGE 2.16 CAN IT BE DONE THANKSComment
-
Yes, see my earlier postComment
-
Dear kevingill ., in your post #2 you adviced that there are few paid services for Activation Lock removal. Can you please inform which is the trustworthy web site. I need to get this lock removed from my laptop. Thanks dear if you can pass this info to all of us.Comment
-
Hi everyone!
I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.
I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...06-27-2025, 08:54 AM -
Good afternoon. My client brought me a Mac A2251 EMC 3348 that he bought at a sale. The computer is completely iCloud-free, but it came with MDM installed. He has tried contacting the company that provides the MDM in every way possible, but they are unwilling to offer a solution. The device is:
Model A2251 EMC 3348. Serial Number: C02G54CZML85
Apple MacBook Pro Core i7 2.3, 13" 2020, 512 GB SSD, 16 GB RAM.
I've tried changing the serial number of the SoC ROM MX25U3235F, but it hasn't worked:
C02G54CZML84 only works up to Monterey.
C02G54CZML86 doesn't work (I... -
Hello everyone, I have a MacBook Pro 13” 2020 (Four ports) (Model A2251 with the 820-01949-A logicboard). It had some minor liquid damage but I carefully cleaned the logic board with alcohol and let it dry as needed. Now I encounter following situation: The MacBook does start but the Battery is not charging when a cable is plugged in any of the ports (I use the powerbrick and cable that came with the device). It had some charge left, so I could safe some data, but I was limited my the 13% and the speed of airdrop. The liquid-damage is almost only limited to the side of the logic board where... -
I am hoping to get some advice. I have a 2020 13" Macbook Pro - A2251 that wouldn't turn on. I have done lots of electronics repair in the past but never on Macbooks. I have had this laptop sitting around and I finally decided to take a look at it and see if I could spring some life into it.
First, it wouldn't boot up at all. I did a DFU restore and managed to get it to power on. Did a full restore but the battery was dead and wouldn't charge. I put in a new battery in it but now it won't boot up when the new battery is connected. I ordered a second new battery just in case,... -
Hi Dear friend., I am working MacBook Pro A2251 Logic board 820-01949-A. The history was that there was slight liquid on the LHS CD3217 & was not powering on at all. No 20v or any amps. I replaced with known good CD3217s & then got the power but its stuck on 5V .18amp. I did power measurements which are below:
PPBUS_G3H=12v
PP3V3_G3H=3.3v
PP3V3_UPC_X_LDO=3.3v
PPDCIN_G3H=5v ????
PP1V8_SLPS2R=1.8v
Do you think the other RHS CD3217 have to be replaced to as they might have gone defective????
Comment