UNOWHY Y13 2022 BIOS password

[volinakis]

i need unlock unowhy Y13 2022 please
Production year : 2022 June
Model : Y13G012S4EI
Motherboard : EM_IG116_200b_ene_TI_V1.0

this is a good one, rex98 missed a spot ...

[atmega4]

working fine tanks You Brother rex98 a use your dump and you volinakis thank you.

[ddhlawi]

I have UNOWHY Y13 (2022) BIOS PASSWORD
MODEL: Y13G012S4EI
M.B: EM_IG116_200B_ENE_TI_V1.0

[minhdigital]

I have UNOWHY Y13 (2022) BIOS PASSWORD
MODEL: Y13G012S4EI
M.B: EM_IG116_200B_ENE_TI_V1.0

Send to you, try ( if it works, thanks for @volinakis solution )

[ddhlawi]

Send to you, try ( if it works, thanks for @volinakis solution )

Thanks.thanks.thanks

[atmega4]

please i need unlock BIOS unowhy Y13 2021
Production year : Aout 2021
Model : Y13G011S4EI
Motherboard : EM_IG116_200b_ene_F_V1.0

[fradoti]

Hello,

I have this laptop model:
Laptop: UNOWHY Y13 2022
Production: Mai 2022
Motheboard: EM_IG116_200B_ENE_TI_V1.0
Serial: IFP22089758
I tried to re-write BIOS but it didn't work. I want to get rid of the Admin password and be able to install Linux on it.

I took out the EPROM, I wrote it, and put it back in.

I tested two BIOS versions :
1. Bios-nopass.BIN.zip by "volinakis"
2. NOPASS.bin.zip by "volinakis"

Unfortunately I don't have any error messages to go by.
When I power on the laptop it simply powers off right away if using "Bios-nopass.BIN.zip" 1 or blinks a couple of times and powers off when using "NOPASS.bin.zip."
The screen remains unlit in both cases.

What should I try next?
I compared my original version and the ones I downloaded with Beyond Compare and I can tell there are big differences.
Unfortunately I don't know what I should be looking for.

Any help would be very much appreciated.

Regards,
Tudor

[minhdigital]

Hello,

I have this laptop model:
Laptop: UNOWHY Y13 2022
Production: Mai 2022
Motheboard: EM_IG116_200B_ENE_TI_V1.0
Serial: IFP22089758
I tried to re-write BIOS but it didn't work. I want to get rid of the Admin password and be able to install Linux on it.

I took out the EPROM, I wrote it, and put it back in.

I tested two BIOS versions :
1. Bios-nopass.BIN.zip by "volinakis"
2. NOPASS.bin.zip by "volinakis"

Unfortunately I don't have any error messages to go by.
When I power on the laptop it simply powers off right away if using "Bios-nopass.BIN.zip" 1 or blinks a couple of times and powers off when using "NOPASS.bin.zip."
The screen remains unlit in both cases.

What should I try next?
I compared my original version and the ones I downloaded with Beyond Compare and I can tell there are big differences.
Unfortunately I don't know what I should be looking for.

Any help would be very much appreciated.

Regards,
Tudor

Send to you

[fradoti]

Send to you

Thank you for answering so fast! It's very appreciated. I'll test it and get back to you.


Regards,

Tudor

[volinakis]

Hello,

I have this laptop model:
Laptop: UNOWHY Y13 2022
Production: Mai 2022
Motheboard: EM_IG116_200B_ENE_TI_V1.0
Serial: IFP22089758
I tried to re-write BIOS but it didn't work. I want to get rid of the Admin password and be able to install Linux on it.

I took out the EPROM, I wrote it, and put it back in.

I tested two BIOS versions :
1. Bios-nopass.BIN.zip by "volinakis"
2. NOPASS.bin.zip by "volinakis"

Unfortunately I don't have any error messages to go by.
When I power on the laptop it simply powers off right away if using "Bios-nopass.BIN.zip" 1 or blinks a couple of times and powers off when using "NOPASS.bin.zip."
The screen remains unlit in both cases.

What should I try next?
I compared my original version and the ones I downloaded with Beyond Compare and I can tell there are big differences.
Unfortunately I don't know what I should be looking for.

Any help would be very much appreciated.

Regards,
Tudor

you can't use bios from another laptop, your original bios has to be modified.

[fradoti]

you can't use bios from another laptop, your original bios has to be modified.

For volinakis

Thankfully somebody took pity on me and did the work in my place.

I'm too old for this. I kind of understand they want some protection in place, but then the providers of the machines should offer software installation services and such, otherwise it's just an internet connected brick. A smart brick, as it were.


----


For minhdigital

I just wanted to let you know that I finally tried it. Almost screwed the board soldering and desoldering so many times, but all's well that ends well.


It works perfectly fine. Thank you for your help.


In case that it matters to you: I powered it up and for about 4 seconds it was running but not displaying anything on the screen. Then it restarted itself and I could access the BIOS.


Now on to the Linux install

[sizar00740]

PLEASE I NEED TO UNLOCK Y13 BIOS PASSWORD

Production year : 2022 June
Model : Y13G012S4EI
Motherboard : EM_IG116_200b_ene_TI_V1.0

[Bilal@pc]

i need unlock unowhy Y13 2022 please
Production year : 2022 May
Model : Y13G012S4EI
Motherboard : EM_IG116_200B_ENE_TI_V1.0

[rex98]

i need unlock unowhy Y13 2022 please
Production year : 2022 May
Model : Y13G012S4EI
Motherboard : EM_IG116_200B_ENE_TI_V1.0

try

[rex98]

PLEASE I NEED TO UNLOCK Y13 BIOS PASSWORD

Production year : 2022 June
Model : Y13G012S4EI
Motherboard : EM_IG116_200b_ene_TI_V1.0

try

[sizar00740]

try

still ask for password

[hoaca388]

still ask for password

KKK

[minhdigital]

still ask for password

Send to you, try ( if it works, thanks for @volinakis solution )