-
-
Unfortunately, nothing has changed. There is no image on the screen or on HDMI, the laptop boots into Windows but without an image. This started after I updated the BIOS of the RTX 3060 6gb video card and did not make a backup copy. I thought that it should boot with the built-in AMD processor. I can physically unsolder the RTX3060 BIOS flash drive from the board, but what should I put in it? What can you advise?Comment
-
No Display, help me
motherboard : G513-6050A3249301-MB-A04
Serial Number : MCNRKD010854505Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hello, pls help me fix this bios, no display. Thanks!
motherboard : G513-6050A3249301-MB-A03
S/N: M8NRKD007363355Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
KEYBOARD NOT WORKING
motherboard : G513-6050A3249301-MB-A04(A4)
Serial Number : MANRKD02210242EComment
-
Also try ROG Keyboard Firmware Update tool, scroll down to "Hotfix"
https://www.asus.com/supportonly/g51...desk_download/
You may have to run it on older Windows 10/11 version
Issue may be secondary KBC firmware, it controls the keyboard and RGB lights
EDIT: Attached here, the one from ASUS website only has the firmware for G513IM (on the G513IH page...)Last edited by m1ch43lzm; 09-23-2025, 03:24 PM.Comment
-
PLEASE, THERE IS NO DISPLAY, ONLY A CHARGER LIGHT. PRESSING THE SWITCH IS UNRESPONSIVE. THANK YOU
BOARD CODE: G513-6050A3249301-MB-A04
CLOSE CODE: G513QC-R535B6T-0
SN: M5NRKD02198220D
CN: 39CB
MFD: 2021-05
Post in ENGLISH !!!Comment
-
Starts, sometimes have access to bios, but no fans and crash during Windows install (already tested with new ram and ssd)
G513-RM-LN391W
BOARD CODE: G513-6050A3348803-MB-A02
CLOSE CODE: G513R-MP-VGT
SN: N8NRKD005088342
CN: 29Y1
MFD: 2022-08
bios version : last one (327)Comment
-
Hello i am looking for a bios for my asus g513ih the bios chip smoked and i had no back up i see one was posted abouve but it errors out looks like its been deleted thank you in advanceComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi
I tried to load the bios you gave me but everytime Iget the same error :
"selected file is not a proper bios"
so I tried to rename it to :
32MB_NEW.bin
32MB_NEW.325
32MB_NEW.327
G513RMAS.325
G513RMAS.327
always get the same error...Comment
-
Post full laptop model number, serial number, motherboard model and a backup of your (corrupted) BIOS
Forum rules: RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
You MUST:
...- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
- Name your thread with make, full model numbers and request
- Provide a BIOS/EC dump if possible
Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
Hello,
I have spent the last hour on this and I guess this is just over my head, so here I am.
I have an ASUS TUF GAMING Z790-PLUS WIFI motherboard here that needs to have the BIOS updated in order to accept the latest CPUs.
The BIOS chips seem to come as a set of two: GD25B64ESIG and GD25B128ESIG. My guess is one of them is a fail-safe for the main BIOS? I really don't know. Or one of them is ME and other is BIOS? I don't know.
Anyway, I took dumps of both chips and then downloaded the latest update for this motherboard from ASUS's website... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
Comment