Hp elitebook 840 g9

[sdkwq]

Hi,
plz remove the password.

the flash file is from the ic near the ram modules, SPI

HP 840 G9
SN: #5CG24604WJ

[minhdigital]

Hi,
plz remove the password.

the flash file is from the ic near the ram modules, SPI

HP 840 G9
SN: #5CG24604WJ

Send to you

[lapfix]

Hi,
plz remove the password.

the flash file is from the ic near the ram modules, SPI

HP 840 G9
SN: #5CG24604WJ

YOU MUST follow these steps :
1) First boot will delay a few minutes
2) IMPORTANT: Go to BIOS Setup ( F10 ) and reset to Factory Default (first main page tab)
3) Restart and enter BIOS
4) 2nd boot restore security settings to defaults.

Try and Give Fedback

[dhan]

EliteBook 840 G9
SERIAL: 5CG33038Z7

please help.
No POST.

keyboard backligh is on, Fan Spins, but no display.
SPI and EC attached.

[smallvhin]

help master to unlock password more thanks
SN:5CG331191J

[smallvhin]

I'm trying to edit mpm and copy the offset of other working bios but no lock. recovering bios password show up.

SN:5CG331191J

[sdkwq]

I spent the last few days trying to unlock it! However, when I tried to remove the EC bios, I messed everything up! Some resistors moved out of place and I'm not sure about their position and their values.
Could a friend of mine send me a photo of this area (photo below) and, if possible, the value of the resistors in red.
Thank you in advance for your help!!

Where those resistors?
top / bottom i can check

[sdkwq]

Hello,
here's the situation:

• Flashed the file
• Got an EC error
• Desoldered the chip again
• Tried to flash externally
• W25Q256JV was damaged
• Bought a new chip
• Flashed the unlocked file from here onto the new chip
• Still got an EC error
• Checked and resoldered all points

Now the Caps Lock LED blinks white seven times.
Is the hp now broken?

[smallvhin]

I'm trying to edit mpm and copy the offset of other working bios but no lock. recovering bios password show up.

SN:5CG331191J

It's working self study more thanks master to support 😊👍

[jonico2007]

Can you please unlock my bios

Serial: 5CG33119K7
Built ID: 22WWWPBZ602#SUUF#DUUF
Board CT: PQSPQ00WBIE09C
Name: HP EliteBook 840 G9
Asset Tag#: 0819877

[jonico2007]

Ec file

[jonico2007]

Please remove the bios password
Serial: 5CG33119K7
Built ID: 22WWWPBZ602#SUUF#DUUF
Board CT: PQSPQ00WBIE09C
Name: HP EliteBook 840 G9

[tuyen821991]

Please remove the bios password
Serial: 5CG33119K7
Built ID: 22WWWPBZ602#SUUF#DUUF
Board CT: PQSPQ00WBIE09C
Name: HP EliteBook 840 G9

TRY

[jonico2007]

TRY

Will try thanks

[rex98]

I noticed there's a lot of unlock request for this model HP EliteBook 840 14 inch G9
The patch won't work if the bios version is latest. use this bin flash both it won't work if you only flash the main you should Flash Both.
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU and put your original DMI.
frequently asked questions:
can i use this to my HP EliteBook 680 14 inch G9- yes

This is the both BID U70 and U71 its the most common BID. i don't have U76, but let me know if you want U76.
This bios main is from official website then added VSSTORE and patched so its fast-boot & Clearme.
To determine your BID use hex editor and search U70 or U71 in your main bios bin or EC, you know the rest.

[diver111]

Hello,
Please help i need to remove password from HP 840 G9.
THANK YOU !
sn : 5CG34351QY
SKU: 9B2L2EC#ABD
BIOS: U71 Ver.01.09.00

[lapfix]

Hello,
Please help i need to remove password from HP 840 G9.
THANK YOU !
sn : 5CG34351QY
SKU: 9B2L2EC#ABD
BIOS: U71 Ver.01.09.00

Applied factory defaults on first boot (F10)
Skipped the "Reset Security Settings" step on second boot .
Used BCU to restore original DMI
Try and Give feedback

[diver111]

Applied factory defaults on first boot (F10)
Skipped the "Reset Security Settings" step on second boot .
Used BCU to restore original DMI
Try and Give feedback

Everything works. Thanks. I didn't succeed with BCU, I flashed the backup copy, but the password didn't return.

[lapfix]

Everything works. Thanks. I didn't succeed with BCU, I flashed the backup copy, but the password didn't return.

Good...so after you try my unlocked bios..no pwd..but you desoldered and try again your original bios and all is ok !

[diver111]

Good...so after you try my unlocked bios..no pwd..but you desoldered and try again your original bios and all is ok !

Everything is correct. I flashed your patched bios. when trying to transfer dmi with the BCU program, errors occurred. I unsoldered the chip again and flashed the old bios file. what is interesting is that during the manipulations with the files, the laptop updated the bios to the latest version, and the old file remained at version 01.09.00. after re-flashing the bios updated again. resets of the main bios and security system were required. and many long reboots. in the end, everything works and there is no password!