the flash file is from the ic near the ram modules, SPI
HP 840 G9
SN: #5CG24604WJ
YOU MUST follow these steps :
1) First boot will delay a few minutes
2) IMPORTANT: Go to BIOS Setup ( F10 ) and reset to Factory Default (first main page tab)
3) Restart and enter BIOS
4) 2nd boot restore security settings to defaults.
I spent the last few days trying to unlock it! However, when I tried to remove the EC bios, I messed everything up! Some resistors moved out of place and I'm not sure about their position and their values.
Could a friend of mine send me a photo of this area (photo below) and, if possible, the value of the resistors in red.
Thank you in advance for your help!!
Comment