Does anyone know if the IT8528E (AXA) needs to be programmed? I changed the EC on an Asus X750 notebook for a new one but it has certain problems. Thanks
-
-
Re: EC IT8528E programmed?
Not programmable -
Re: EC IT8528E programmed?
can I replace with iT8518E also ?Comment
-
Re: EC IT8528E programmed?
No.Comment
-
Re: EC IT8528E programmed?
The IT8528E is extracted from the BIOS when it is started without programmingComment
-
Re: EC IT8528E programmed?
if you do it for the first time, take your time to solder all pins rock solid. proof they are with a nice amount of force with tweezers. try it with soldering iron onlyComment
-
ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For... -
Hello.
Have this ACER Spin 5 SP514-51N that have only 5V on usb-c charging ports and usb-c comtroller CYPD5225-96BZXI heats up. so i order new controller and replace it. now u have no reaction to charger. must be this ic programmed first and if yes than how... -
Hello.
Have this asus K56cn that came with strange lcd work. so i replace it, but when i connect battery i get burned SIO. After replace, no start. must this kbc IT8517E programmed or it program itself from bios? -
In the above mentioned monitor, I removed the plug a few times and this resulted no power.
I opened it, soldered the dc jack and worked again.
But since then colors have changed, too bright (or something like this) and lines, eg letter, are not very crisp as they used to be, they are vague, like faded out.
I checked voltages on the main board, they look ok (according to the service manual. It' attached at the bottom):
IC600 (D9329)
pin 1 (BST) 9.6V
pin 2 (VIN) 13.5V
pin 3 (SW(Switching output)) 4.8V
pin 7 (EN)
pin 8 (SS) 2.6V
IC601... -
Hi guys; i have installed win 10 Home Edition from a DVD iso and it changed to Win pro ,how i change it back to Home edition without reinstall again ?Thanks
Comment