rediii
h???, spurrrn
Last Activity: Today, 06:07 AM
Joined: 03-30-2018
Location: see country
-
replace u6318. are you sure you soldered Q263 correctly?... -
did you check U6318? what voltage do you have on vbus20, after the chip?...Leave a comment:
-
replacing Q263 (you really should use this chip as BGA just reball it) and U192 should be the standard procedure (sometimes the port is bad, too, due to bad solder quality)....Last edited by rediii; 12-07-2025, 01:58 AM.Leave a comment:
-
thanks...Leave a comment:
-
i don't get it. this python script is bloated rubbish? it doesn't do anything, does it?...Leave a comment:
-
thank you very much, this is interesting. where is this from?...Leave a comment:
-
great, man!Leave a comment:
-
i don't think this is great. nothing changed......Leave a comment:
-
i just can share this:...Leave a comment:
-
...
Leave a comment:
-
give us some proof, maybe do a video and upload it, thanks....Leave a comment:
-
it will be leaked, when these devices are worthless :o)...Leave a comment:
-
yeah, it doesn't work...Leave a comment:
-
Okay, then that applies to the three of us. this is probably nonsense....Leave a comment:
-
are you able to specify what you have done exactly with specific timings and the "shorting spot"? can anyone please proof this with the same device? thanks...Leave a comment:
-
or he is lieing :o)...Leave a comment:
-
this please...Leave a comment:
-
why should the lpc or espi signal be pulled to ground? even if the reset signal can be pulled high by shifting the resistor the jtag is blocked for programming and will ever be via efuse!...Leave a comment:
-
this...Leave a comment:
-
it is not risky... i tried this hundreds of times. not a single machine died...Leave a comment:
No activity results to display
Leave a comment: