Is this gpu or vram failure? Thx
Collapse
X
-
Re: Is this gpu or vram failure? Thx
That is external...hdmi port....The original lcd is broken. Gpu on laptop is gtx1070. The funny thing is that that upper right square and bottom is working fine. So maybe a one or two gpu ram moduls gone bad...but not sure.Last edited by myth77; 03-08-2022, 04:42 AM.Comment
-
Re: Is this gpu or vram failure? Thx
Comment
-
Re: Is this gpu or vram failure? Thx
Not 100% certain but the fact your getting image in 2 corners leans more to VRAM .
Did you start with replacing thermal paste?
If no change...
your best bet its start by
Reflowing all vram see if problem clears up .
If not replace 2 at a time from donor, buy stencil.Comment
Related Topics
Collapse
-
by jermac0711Need your advice engineers and Master Technicians out there. I have Palit GEFORCE GTX1070 JetStream with
vram error shows below I tried to reball the old one but no luck. I tried to replaced them but still no luck.
any idea guys????... -
This specification for the ASUS ROG G20CB-DH71-GTX1070 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ROG G20CB-DH71-GTX1070 boardview and ROG G20CB-DH71-GTX1070 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-12-2024, 03:30 PM
-
by dreico33Hellow guys,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i... -
by Sus256Hi all!
HISENSE 65E7KQ PRO
RSAG7.820.13512 - chassis
MT9618BAATAB - cpu
RSAG7.820.12059 - power
HD650Y3U77 - panel
KLM8G1GETF - emmc
The TV does not turn on, the standby indicator is on. All voltages are present.
Emms is dead. Not readable, not detected.
Replaced emmc.
But with another dump there is no launch
Terminal log
UART
<
AC_ON
RPMB key is not yet programmed
HASH1_VERSION=0x00000000 64bit
E-B
FDE enabled
layout pattern onebin by SAR7,0... -
by abobek zumHello everyone,
I have a question regarding this laptop. Laptop came from my friend, completely dead. No reaction for power button, Adpater etc. Diagnosis: burned HIS mostfet from VRAMs. After replacing the mosfet, Laptop starts to power up, KB lights up for few second and switch off, laptop remain ON but no display. Vents are switching ON after some time. No Caps Lock or reaction on USB stick. No display also through HDMI. All coils resistance seems to be OK except resistance on VRAMs – 15 Ohm ( as I study the other repairs or diagnostic of that laptop it should be around 90 -...03-03-2025, 04:34 PM - Loading...
- No more items.
Comment