Is this gpu or vram failure? Thx
Collapse
X
-
Re: Is this gpu or vram failure? Thx
That is external...hdmi port....The original lcd is broken. Gpu on laptop is gtx1070. The funny thing is that that upper right square and bottom is working fine. So maybe a one or two gpu ram moduls gone bad...but not sure.Last edited by myth77; 03-08-2022, 04:42 AM.Comment
-
Re: Is this gpu or vram failure? Thx
test with mats
Comment
-
Re: Is this gpu or vram failure? Thx
Not 100% certain but the fact your getting image in 2 corners leans more to VRAM .
Did you start with replacing thermal paste?
If no change...
your best bet its start by
Reflowing all vram see if problem clears up .
If not replace 2 at a time from donor, buy stencil.Comment
Related Topics
Collapse
-
by jermac0711Need your advice engineers and Master Technicians out there. I have Palit GEFORCE GTX1070 JetStream with
vram error shows below I tried to reball the old one but no luck. I tried to replaced them but still no luck.
any idea guys????... -
by npielawskiI will just preface all this by saying that I have a fairly technical background but have never attempted SMD electronics diagnostics and repair before, I really like the idea and want to learn.
I have a MacBook Pro late 2016 that died maybe four years ago. Over the course of 30 seconds, it got slower and stuttered, until it froze for a second and died. No click from the trackpad anymore, nothing. I started getting interested in electronics repair and decided to give it a shot, so I opened it, removed the battery (one cell was puffy), took out the motherboard and experimented with...10-15-2025, 01:53 AM -
This specification for the ASUS ROG G20CB-DH71-GTX1070 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ROG G20CB-DH71-GTX1070 boardview and ROG G20CB-DH71-GTX1070 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-12-2024, 03:30 PM
-
by dreico33Hellow guys,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i... -
by puccovelliHi all, I hope this is the right place to post.
I'm having a problem with a Dell 9310 which is posting 2 orange, 4 white lights on startup (hangs on Dell BIOS logo). The service manual says its a RAM failure.
I've taken the motherboard out and noticed that one of what looks like an SMA 0805 resistor has blown (see photo). The board is an LA-J144P Rev 2.0(A01).
1] Could someone confirm what the component that has blow actually is (and where I could get another from).
2] Whether this component is likely to cause the RAM failure issue, and if replacing... - Loading...
- No more items.

Comment