Help to detect the code of this integrated..
thanks a lot...
thanks a lot...
Attached Files
-
-
Re: help! for this "ic" JD ED G21
Can you post the details of the logic board ? Brand / model / markings on the PCB ? -
Re: help! for this "ic" JD ED G21
https://www.badcaps.net/forum/showpo...84&postcount=2
https://www.google.com/search?client...+ym%22+richtekOpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
First post -Intel NUC 10i5 -BXNUC10i5FNH not powering on -IC burnt- request for IC details/datasheetHi all,
I came across this very active forum with knowledgeable folks on electronic circuits and components, while google searching for the details of my burnt IC marked 7603 in Intel NUC board. I joined this forum today and this is my first post here.
I recently got an Intel NUC 10i5 and had installed Linux Mint and was using it for about a month when it died suddenly and did not power up after that.(Power Adaptor is ok). When I opened the NUC , there was a burnt IC marked 7603 (and ILCB in second line). I am unable to find the details/datasheet of this IC. I will be grateful if... -
Hi friends!
It does not charge or detect the battery. At first it didn't start, I programmed the BIOS with the file that is in this forum and it turned on but it doesn't detect a battery. I need to try another bios that is not the one that is already published in the forum, I suspect that the one I recorded is corrupt, or incompatible in some detail and that is why it does not detect the battery. I did all the measurements on the charguer integrated circuit and they are all ok. I think the problem comes from the data BUS side. It is for this reason that I need a different... -
Hello i have a msi GP63 and the gtx 1060 is not detect in the bios and not detect in windows , i have flash the vbios with programmer and same mistake, i have the ec do mistake with keyboard key not work or keyboard not work , i know i have to chance the ec but it's possible the ec do the gtx not detect in bios and in windows? i have check the voltage of the vga and it's good the die of the gpu is little hot at used -
I have a Pioneer PDP-427XD TV, not many hours on it. Bought second hand, I think it must have been a TV used in a meeting room, as it was like new when we got it. No manual, but worked out most of it.
The Problem I have now is it went out with a crack noise, then a blinking LED, if I remember it had 6 flashes.
I had a look and after a bit of hunting around (very frustrating as TV shuts down after a few seconds), I found a Capacitor on the Scan Assy Top Board had cracked and tried its best to meld down. Now, as it happens, I can get to this capacitor, but not the others... -
ASUS PRIME Z690-P WIFI D4 BIOS m2 no detect
pls hellp and fix bios...
Comment