Announcement

Collapse
No announcement yet.

Lenovo V360, no detect battery

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lenovo V360, no detect battery

    Hi friends!


    It does not charge or detect the battery. At first it didn't start, I programmed the BIOS with the file that is in this forum and it turned on but it doesn't detect a battery. I need to try another bios that is not the one that is already published in the forum, I suspect that the one I recorded is corrupt, or incompatible in some detail and that is why it does not detect the battery. I did all the measurements on the charguer integrated circuit and they are all ok. I think the problem comes from the data BUS side. It is for this reason that I need a different bios file than the one published in the forum to test.


    Motherboard: HannStar LA36 MB 09939-1
    09939-1
    48.4JG01.011

    IC charguer : BQ24745

    EC: NPCE781EA0DX

    Bios version: 2DCN16WW
    EC version : 2DEC02WW

    #2
    Re: Lenovo V360, no detect battery

    Unable to comment on the bios issues but for the battery pack - investigate the voltages on EACH pin on the battery connector.

    Specifically, we are interested to confirm the SMBUS / I2C (SDA & SCL) lines are ok since they are used by the logic board to communicate with the BMS (battery management system). This will be a good start.

    Comment


      #3
      Re: Lenovo V360, no detect battery

      Since you already got an idea of where the fault might come from,i'll suggest you do that first or you can measure the SDA and SCL line with your oscilloscope or measure the bios chip pins with the oscilloscope.

      Comment

      Working...
      X