Announcement

Collapse
No announcement yet.

Water Damege 820 - 01958A no Power on

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Water Damege 820 - 01958A no Power on

    Hi

    I have a Problem with a Macbook Air 13 2020. It has Waterdamage. If i plug the USB C, it not starting and no boot. It do nothing. Only the T2 IC and U7800 is warm. Can you pls help me. There is no PP5V_G3S and PP3V_G3S. There is PP3V3_G3H = 3,2V but P3V3MAIN_PGOOD is missing. Is that normal ?

    I measered the Power Rail:

    PPBUS_G3H = 12,3V

    PPBUS_HS_CPU = 12,3V

    PPDCIN_G3H = 20,3V

    PP5V_G3S = 0V

    PP5V_S5_LDO = 0V

    PPVIN_G3H_P5VG3S = 12,4V

    PPVIN_G3H_P3V3G3H = 12,4V

    PPVIN_G3H_P3V3G3HRTC = 12,3V

    PP3V3_G3H_PMU_VDDMAIN = 3,2V

    PP3V3_G3S_WLANBT = 0V

    PP1SR3V3_G3H_P0V6_S3_VIN = 3,2V

    PPBUS_G3H_SSD0 = 12,3V

    PPBUS_G3H = 12,3V

    PPVIN_G3H_P1V1_S3 = 12,38V

    PP3V3_G3H_RTC = 3,3V

    PP3V3_G3H = 3,2V

    PP3V3_G3SSW_SNS = 0V

    PP3V3_G3S = 0V

    PPBUS_G3H_SPKRL = 12,3V

    PPVCC_NAND_SSD0 = 0V

    PP1V8_G3S = 0V

    PPVCC_S0_CPU = 0V

    PPVCCIN_AUX_PCH

    PP1V8_PRIM_PCH

    PP1V1_S3

    PP0V6_S3





    PPVDDCPU_AWAKE = 0,76V

    PPVDDCPUSRAM_AWAKE = 0,8V

    PP0V82_SLPDDR = 0,8V

    PP1V8_SLPS2R = 1,8V

    PP1V8_AWAKE = 1,8V

    PP1V8_S3 = 0V

    PP1V8SW_VCCQIO_SSD0 = 0V

    PP1V1_SLPS2R = 1,1V

    PP1V1_SLPDDR = 1,1V

    PP0V9_SLPDDR = 0,9V

    PPVNN_PCH_EXT_REG = 0V

    PP1V05_PCH_EXT_REG = 0V

    PP1V05_PCH_VCCPRIM

    PP1V05_PCH_CPU

    PP0V9_SSD0 = 0V

    PPVCCQ_ANI_SSD0

    PP0V8_SLPS2R = 0,8V

    PP3V_G3H = 3,0V

    PP1V2_AWAKE = 1,2V

    PP3V3_AWAKE = 3,24V

    PP3V3_S5 = 0V
    Tags: None
    #2
    Re: Water Damege 820 - 01958A no Power on

    P5V_G3S = 0V

    Check and post the voltage reading of P5VG3S_EN_DLY

    The P5VG3S_EN_DLY signal is driven by U7610. Investigate that this circuit is operating correcting by reviewing the INPUT to U7610 (pin # 1).

    Be sure that R7613 is still present.

    U7610 single gate IC is being powered via pin # 5 ?

    Post your readings.
    Attached Files

    Comment

      #3
      Re: Water Damege 820 - 01958A no Power on

      Originally posted by mon2 View Post
      Check and post the voltage reading of P5VG3S_EN_DLY

      The P5VG3S_EN_DLY signal is driven by U7610. Investigate that this circuit is operating correcting by reviewing the INPUT to U7610 (pin # 1).

      Be sure that R7613 is still present.

      U7610 single gate IC is being powered via pin # 5 ?

      Post your readings.
      Thanks for the help. But now I have a bigger problem. The PP3V3_G3H is also no longer there.

      I removed the mosfet Q7680. After that I measured the pins

      https://ibb.co/17RcpLq

      Comment

        #4
        Re: Water Damege 820 - 01958A no Power on

        Remove all power.

        Meter in resistance mode.

        Check the resistance to ground on the inductor L7690.

        Value ?

        Comment

          #5
          Re: Water Damege 820 - 01958A no Power on

          Originally posted by mon2 View Post
          Remove all power.

          Meter in resistance mode.

          Check the resistance to ground on the inductor L7690.

          Value ?
          What do you mean with "all Power"

          Comment

            #6
            Re: Water Damege 820 - 01958A no Power on

            What do you mean with "all Power"

            No adapter.

            No battery.

            Then take the resistance measurements.

            Comment

            Previous template Next
            Working...
            X