DAG37AMB8D0 very interesting problem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • ronaldopdias
    Senior Member
    • Jul 2015
    • 93
    • United Kingdon
    #21
    EC_RST# is not explicitly labelled on this schematic because the platform uses the eSPI bus, and the reset for the Embedded Controller (EC) is provided via ESPI_RST#, which comes directly from the PCH.
    As I still can't find the ESPI_RST#​ - I have checked the line that comes before and HWPG comes before ECRST.
    HWPG is not present. No short on that line.
    Any advice, please.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • AquaMan Ua
        Problem with PANASONIC CF53 laptop after changing BIOS settings
        by AquaMan Ua
        Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
        2
        2 Photos
        05-17-2025, 09:40 AM
      • traxformania
        TONGFANG "GM7TG7P" Bios Password Problem?
        by traxformania
        Hello,

        I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).

        But today it's not accepting my password. I'm %100 sure i'm entering the correct password.

        I'm trying to reset my bios without success.

        I tried :

        -I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries...
        11-15-2023, 07:32 AM
      • macabook
        🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
        by macabook
        Hello everyone,

        I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
        🧩 Initial Issue
        • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
        • External display (HDMI) shows
        ...
        07-24-2025, 02:17 PM
      • trouble55
        NEC VersaPro PC-VRT42FBFR22B BIOS problem
        by trouble55
        Hi All,

        [Mother board model]
        V-VE212(U3E1)

        [Serial number]
        24000135PA

        [BIOS chip model]
        Macronix MX77L12850F

        I am having some problems with the BIOS of my Versapro PC-VRT42FBFR22B.

        I extracted the BIOS file (versapro001.bin 16MB) from PC-VRT42FBFR22B ROM (MX77L12850F) using CH341A and NeoProgrammer V2.2.0.10, but I don't know how to remove the BIOS password, so I can't open the BIOS even if I boot with F2.

        I also downloaded the BIOS update package (933A0400.zip) for PC-VRT42FBFR22B from the official...
        09-19-2024, 01:24 AM
      • toti24
        (NEED HELP)dell precision m4600 problem after bios flash (unbrick)
        by toti24
        dell precision m4600 laptop
        i7 2760qm
        8gb ram 750gb HDD
        intel hd 3000 integraded and nvidia quadro 2000m

        pleasea bear with me english isnt my language and ill try to be as clear as possible
        note i live in mexico in a very small town..
        thank you.

        laptop got bricked (freeze at dell logo) i managed to unbrick it but now am facing a problem...... let me explain what and how it happened.

        the brick happened when i was installing win 10 using usb.
        used rufus and officia microsoft.iso
        it finished copying files from usb...
        03-06-2022, 08:39 PM
      • Loading...
      • No more items.
      Working...