EC_RST# is not explicitly labelled on this schematic because the platform uses the eSPI bus, and the reset for the Embedded Controller (EC) is provided via ESPI_RST#, which comes directly from the PCH.
As I still can't find the ESPI_RST# - I have checked the line that comes before and HWPG comes before ECRST.
HWPG is not present. No short on that line.
Any advice, please.
As I still can't find the ESPI_RST# - I have checked the line that comes before and HWPG comes before ECRST.
HWPG is not present. No short on that line.
Any advice, please.
Comment