Hello everyone.
I got a HP 430 G3 laptop, with the following problem:
When you plug in the charger, the power LED lights up for 1-2 seconds, then goes off, and I can't turn on the laptop.
If I have the battery plugged in, it's charging, as the LED changes to orange. However, the laptop still cannot be turned on.
I reseted CMOS, reflashed the BIOS chip.
3.3V and 5V are present.
The power button is doing it's job, and there is in fact 3.3V on it, which goes to 0 when pressed, but still, it won't do anything.
I have schematics and boardview, but I don't know where to start..
Any ideas?
I got a HP 430 G3 laptop, with the following problem:
When you plug in the charger, the power LED lights up for 1-2 seconds, then goes off, and I can't turn on the laptop.
If I have the battery plugged in, it's charging, as the LED changes to orange. However, the laptop still cannot be turned on.
I reseted CMOS, reflashed the BIOS chip.
3.3V and 5V are present.
The power button is doing it's job, and there is in fact 3.3V on it, which goes to 0 when pressed, but still, it won't do anything.
I have schematics and boardview, but I don't know where to start..
Any ideas?
Comment