Hello!
Quick question , i think this is the right category.
Had a E6230 laying around, and wanted to get it back to life. The battery that had inside was completely dead.
I have many 18865 cells on side, so i took it apart (carefully but somehow the plactics had to be glued again).
The new cells are 4.19 , 2458mah , calibrated in external power adapter seperate (likala) , plugged them all together.
And again the laptop shows 9.5% health .
Searched around ,and i had to reset the controller as well,but i haven't done it in the past, it was my 1st try to replace the powercells.
Do we have any way to "reset" the controller or re-calibrate the battery ?
Thanks!
Quick question , i think this is the right category.
Had a E6230 laying around, and wanted to get it back to life. The battery that had inside was completely dead.
I have many 18865 cells on side, so i took it apart (carefully but somehow the plactics had to be glued again).
The new cells are 4.19 , 2458mah , calibrated in external power adapter seperate (likala) , plugged them all together.
And again the laptop shows 9.5% health .
Searched around ,and i had to reset the controller as well,but i haven't done it in the past, it was my 1st try to replace the powercells.
Do we have any way to "reset" the controller or re-calibrate the battery ?
Thanks!
Comment