Help with bios programmer (EZP2019+)

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Rhadu23
    replied
    Re: Help with bios programmer (EZP2019+)

    Originally posted by andresi
    how abaout this sir, i want to flash Micron, 1,8v "25q128a 13eco 99chn 318015", can i add new ic data to ezp 2019?
    Make sure the chip is well sited as I have the same programmer and usually get that when the chip is not read properly.

    Leave a comment:


  • andresi
    replied
    Re: Help with bios programmer (EZP2019+)

    how abaout this sir, i want to flash Micron, 1,8v "25q128a 13eco 99chn 318015", can i add new ic data to ezp 2019?
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • Smoxx
    replied
    Re: Help with bios programmer (EZP2019+)

    For now, AFAIK, EZPXXXX programmers can't program MX25L12873F and cross compatible ones. It will even read it and save the BIOS if you choose any 128mb EEPROM, but it can't properly write to it. The result will be corrupted data.

    At the other hand, a cheap CH341 programmer + AsProgrammer 2.1.0.13 can easily program these.

    I own both programmers so I'm saying this from personal experience.
    Last edited by Smoxx; 02-14-2021, 03:11 PM.

    Leave a comment:


  • mon2
    replied
    Re: Help with bios programmer (EZP2019+)

    Originally posted by tim9
    I recently got EZP2019+
    I am trying to read Winbond W25Q128FVPQ but always getting not detected message.
    I am using SOC8 pin socket that came with programmer.

    I am selecting W25Q128 inside EZP2019+ software available chips.
    Is there anything I am missing ?
    Thanks
    Manually slow down the SPI flash data rate to 3 Mhz as per attached graphic and test again.

    Please post your results.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • tim9
    replied
    Re: Help with bios programmer (EZP2019+)

    I recently got EZP2019+
    I am trying to read Winbond W25Q128FVPQ but always getting not detected message.
    I am using SOC8 pin socket that came with programmer.

    I am selecting W25Q128 inside EZP2019+ software available chips.
    Is there anything I am missing ?
    Thanks

    Leave a comment:


  • SMDFlea
    replied
    Re: Help with bios programmer (EZP2019+)

    You need to cross reference the MX chip with another thats in the EZP support list. The winbond W25Q128JV is cross compatible.

    https://www.hklrf.com/24download/img/EZP2019-List.txt
    https://www.winbond.com/hq/support/r...rch=mx25l12873

    Leave a comment:


  • NiroPall
    replied
    Re: Help with bios programmer (EZP2019+)

    No i dont have

    Leave a comment:


  • SMDFlea
    replied
    Re: Help with bios programmer (EZP2019+)

    I don`t think you can add new chips to the EZP programmers. Do you have any other programmers

    Leave a comment:


  • NiroPall
    started a topic Help with bios programmer (EZP2019+)

    Help with bios programmer (EZP2019+)

    Hi Friends,
    Anyone know how to add a new chip to EZP2019 programmer.
    i need to add MX25L12873F TO SOFTWARE,
    PLEASE see the attached picture,

    Tks.





    Last edited by NiroPall; 09-19-2020, 02:35 AM.

Related Topics

Collapse

  • STKR123
    The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
    by STKR123
    Greetings badcaps community,

    I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
    So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

    Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

    I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

    These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

    I learned that desoldering...
    10-29-2024, 06:03 AM
  • hotcrossedbuns999
    M715q Desktop (ThinkCentre) - Type 10M3 - Request bios chip location and useable bios for use with CH341A Programmer.
    by hotcrossedbuns999
    My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.
    1. I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
    2. I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
    3. I could only locate two chips that look like bios chips. Could someone verify this
    ...
    01-03-2025, 12:32 PM
  • macabook
    🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
    by macabook
    Hello everyone,

    I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
    🧩 Initial Issue
    • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
    • External display (HDMI) shows
    ...
    07-24-2025, 02:17 PM
  • zlr8r
    looking for fully extracted by programmer Bios for a Dell Inspiron 17 (7786)
    by zlr8r
    looking for a fully extracted (by programmer) Bios for a Dell Inspiron 17 (7786) v.1.09 or newer, so I can compare it with my own bios to check for corruption.
    cheers

    Dell Inspiron 17 (7786) Laptop
    Service Tag: 5J0NHT2
    Bios: 1.9.0
    MOBO: RO 15 17 WHL 2GB MB / 18706-2

    Attached;
    1. My saved bios using a programmer
    2. Dells Bios updater .exe (v1.16)
    3. Dells Bios recovery file
    4. What I got when i tried to extract the main bios .bin file from Dells Bios v1.16 exe/rcv using some .py script i found online.
    5. Image of ME...
    12-18-2023, 03:08 PM
  • Vesko356
    [Guide] How to find the right HP bios version to flash
    by Vesko356
    First of all thanks to all of our members who have posted previously all methods posted here.
    Please leave a comment if you find something new,or have anything else to add.
    -----------------------------------------------------------------------------------------

    Find by serial number,model number or series

    If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
    Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
    Operating system and OS version.If...
    08-11-2023, 03:27 AM
  • Loading...
  • No more items.
Working...