Re: Dell E5470 i5-6300HQ (ADP70 LA-C831P) - BIOS Needed ( Working BIOS Found )
Sup , Finally It Worked !!
BIOS VERSION : 1.7.3 (no password)
Processor : i5 6300HQ ( Quad Core )
Thanks hoaca388
I am not sure but this should be pinned (sticky thread or so) so its gets easier for other to find out device specific bios....
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Dell E5470 i5-6300HQ (ADP70 LA-C831P) - BIOS Needed
Thanks but its not working.
Still stuck on power button light with black screen. No indication of anything....
Leave a comment:
-
Dell E5470 i5-6300HQ (ADP70 LA-C831P) - BIOS Needed
Dell Latitude E5470 intel Core i5-6300HQ
I tried couple of bios that are listed under older E5470 threads but none of them worked.
I am getting black screen with power button light on. No other indication.
[B]Condition Before Bios Flash :[/B]
- Was stuck on booting into Diagnostic Boot Menu for some reason and no key combination worked at all. After little bit of research I concluded the faulty bios.
[B]Programmer[/B] : EZP2019+
[I]Its detecting SPI_FLASH chip...
Leave a comment:
-
Re: HP BIOS unlock tool
nvm
Actually I was able recover it using old backup.
Thanks...
Leave a comment:
-
Re: HP BIOS unlock tool
nvm
Actually I was able recover it using old backup.
Thanks...
Leave a comment:
-
Re: HP BIOS unlock tool
Oh BIOS is empty, I think that's the issue. I am not able to read the chip now , It seems damaged. My programmer reads another Winbond chip but not this one.
I have old bios 1.13 backup. I am attaching here.
Requested information :
Model : HP EliteBook G3 Touch i5 6200
Logic Board : 6050A2892401-MB-A01...
Leave a comment:
-
Re: HP BIOS unlock tool
I did bios upgrade 1.51 after password unlock. It was working fine but after couple hours it started behaving weird. So I thought it might be soldering fault and tried to heat up the chip with no success. I was able to backup 1.51 backup from the chip but I feel that its corrupted based off comparison with another laptop backup.
I am attaching it here.
So far I tried older bios version 1.39 unlocked backup but nothing worked.
Same LED blinking pattern that shows logic board failure....
Leave a comment:
-
Re: bios dump elitebook 840 g3
I have same issue with G3.
Did you find solution ?...
Leave a comment:
-
Re: HP BIOS unlock tool
Guys I need help.
My Laptop : HP Elitebook 840 G3 (Touch version)
It was locked so I successfully unlocked it and updated bios to latest.
somehow bios chip was not properly soldered so it was showing flashing LED.
Now I soldered it and but it failed.
So I took same winbond chip from another board ( matching ) , flashed it with my backed up bios.
Now laptops starts with blank screen and runs the fan very highest speed for a while and then it goes off. Keeps on repeating the same cycle.
Not sure...
Leave a comment:
-
Re: Please Remove Password In Bios Dump
i am getting same error , how did you resolve it ?...
Leave a comment:
-
Re: Help with bios programmer (EZP2019+)
I recently got EZP2019+
I am trying to read Winbond W25Q128FVPQ but always getting not detected message.
I am using SOC8 pin socket that came with programmer.
I am selecting W25Q128 inside EZP2019+ software available chips.
Is there anything I am missing ?
Thanks
Leave a comment:
No activity results to display
Show More
Leave a comment: