Hp g62-a153e0

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mazloum
    Badcaps Veteran
    • Sep 2012
    • 504
    • Lebanon
    #1

    Hp g62-a153e0

    G62-A153E0
    PM_A_HPC_S MV_MB_V1
    This computer doesn't display,....
    power up, fan works then off and works normal,
    all volts are ok: 5v 3.3v 1.1v and others
    it is AMD with uma
    i reflashed bios with no succes, tried HDMI
    no success
    please help
    i also get the post code 74 on post card tester.
    wifi led is always on, and cannot be switched off
    Caps lock is always off and cannot be on...
    Last edited by piernov; 02-05-2020, 12:24 PM. Reason: remove bold
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4439
      • France
      #2
      Re: Hp g62-a153e0

      Could be a dead AMD northbridge RS880M 216-0752001.
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • mazloum
          Badcaps Veteran
          • Sep 2012
          • 504
          • Lebanon
          #3
          Re: Hp g62-a153e0

          Originally posted by piernov
          Could be a dead AMD northbridge RS880M 216-0752001.
          you are right....
          thank you very much.....:
          i reflow it , and works
          Last edited by mazloum; 02-08-2020, 01:56 AM.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • CapLeaker
              Dell ATX PSU won’t start, but forcing it works fine?
              by CapLeaker
              Got a case of something new weird at work. There is an old 2nd gen Intel i3 in an old “Pizza box” shell that has a small form factor power supply. Unfortunately I forgot to take pictures and model number off it.

              Anyway, I get to work and get to look at this computer. Standby LED on the PSU is on, but the computer won't start. Hmm o.k. take the battery out of the main board try again, nothing. O.k. then… unplug the power supply from the main board and put in a full size ATX PSU (yeeeesss! Exact that blown Powerman IP that I fixed a while back), plug it in and the old...
              10-28-2024, 06:59 PM
            • rounin
              MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
              by rounin
              Hi everyone,

              I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

              🛠 Original Issue
              The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
              Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

              I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

              ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
              04-19-2025, 01:18 AM
            • ex250
              Kenwood SW-505D no sound issue and pops from time to time when it works
              by ex250
              Hello mates,

              I bought this subwoofer a few days ago used and blind and it works erratically, as far as I could see, it has been tampered with, the speaker is not the original one and of 8 Ohm when it should be of 4, and there are some welds like reworked by the boards.

              It doesn't have much power (expected more from it) and it distorts if you increase the volume over the middle, maybe it's because of the high impedance of the speaker. The problem is that it has sound when it wants, the led panels all work correctly, you can hear the power relay on power on, but right now...
              12-29-2024, 03:27 PM
            • eurowill
              a2141 820-01700 internal display not working / external works
              by eurowill
              Hey ya'll this is my first post on here. I recently aquired a used/broken 2019 mbp 16 a2141 with the 820-01700 board. Seller told me that the laptop needed a new lcd. However upon doing some troubleshooting i found out the lcd is fine.

              Laptop boots like a normal, plays chime, touchbar lights up however there is no image on the internal lcd. If i connect and external monitor while its already on, nothing happens and no image is displayed on external. However if i restart or boot the machine while its plugged in, the external then works and a backlight is now visible on the laptop....
              07-23-2024, 10:06 AM
            • vf fa
              EIZO CX270 - No signal but Backlight and Panel works, logo works, admin menu works. OSD doesn't. What?!
              by vf fa
              Hi, so i guess I´ll have to make a new topic here, as i browsed through hundreds of other threads but couldn't find a solution to my problem yet.

              I got a EIZO CX270 from a friend. He said it doesn't work anymore and wont display any signal or take any OSD inputs. Well, as an aspiring photographer I couldn't say no, could I? Thought it was an easy game, replace a bad cap and have a working monitor. But nooope, it wasn't supposed to be this easy.

              So let me start with the problem description. I'll try my best not to skip anything so this might get rather long.
              ...
              01-31-2024, 01:40 PM
            • Loading...
            • No more items.
            Working...