Asus f552m : nerf to identify resistor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • disorder
    Senior Member
    • Sep 2015
    • 156
    • france
    #1

    Asus f552m : nerf to identify resistor

    Hello
    Have Asus f552m to fix
    Water damage
    Thé Guy says : when i touch some pins on SIO the laptop works. Either no boot. Led ok
    On inspection this Guy is dead
    Can u help me identify ?
    Attached Files
    Last edited by disorder; 01-23-2020, 02:57 PM. Reason: add pictures
    Tags: None
    • disorder
      Senior Member
      • Sep 2015
      • 156
      • france
      #2
      Re: Asus f552m : nerf to identify resistor

      hello

      finally find, 100kohm, line 3vsus_on, so explain that no boot, cause ITE not activate
      replace by new one and voila !
      pb solved

        Comment

        Previous template Next

        Related Topics

        Collapse
        • throwaway327
          Asus ROG Ally X -RC72LA - changed hidden bios settings with 'Smokeless-UMAF', won't get past boot logo
          by throwaway327
          ASUS ROG Ally X - (Handheld Gaming PC)
          Model No: RC72LA
          Serial No: SBNVKD001014459

          Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.

          I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
          06-18-2025, 05:52 PM
        • trbovan
          Asus GL731GT Boot loop
          by trbovan
          Laptop is a GL731GT with the I7-9750h and GTX1650.

          Full model number is gl731gt-rb71-cb
          Serial: (placeholder for when I get home)
          Board model: G531GT REV. 1.5

          Issue: Laptop was password protected with admin password. I extracted the Bios with the CH341A and ASprogrammer. I Initially saved the backup. I then scoured the internet for a rom to flash to the chip. I found a file and flashed it. I then read it back to verify and mistakenly over wrote my backup of the original Bios.

          I assembled and tested anyway. The bios worked, I was able...
          10-04-2023, 07:27 AM
        • jrodefeld
          Asus laptop won't boot (no power) - possible bad caps?
          by jrodefeld
          I would like to see if anyone could help me salvage a very expensive laptop that is no longer working.






          The model:           Asus Zenbook Pro Duo UX582L

          I have used this laptop lightly since I purchased it new in 2022. I have always taken precautions to take care of it the best I could, and have never done anything that would risk causing damage to it or shorten it's life.

          However, around six months ago, the laptop stopped working on battery power. It continued to work fine when plugged in, but as soon as power was disconnected,...
          09-02-2024, 04:55 PM
        • acata
          Asus X450LC REV 2.2 can't boot to anything
          by acata
          I get this Asus X450LC REV 2.2 can't boot from SATA, ODD or USB flash drive.

          Power on normally. Boot to bios ok.
          But I can't normal boot from HDD (windows 7) just freeze on the animation. I can't boot from pre-installed SSD windows 10, bsod: driver pnp watchdog. I can't boot USB flash drive Hiren boot CD or linux mint.
          10-10-2023, 05:15 AM
        • gica69
          Need help to identify and to locate a 0.33 ohms fusible resistor for power supply
          by gica69
          I have a quad charger that is split into 4 separate sections and one section doesn’t charge anymore. I have located what I think is a thermistor and on the shrink tube it says 125 degrees C. I cut the shrink tube and it's a 33 ohms resistor. It measures a little less than 1/2 inch in length. I am including pictures of it. Please help me identify it. So, it should test at 0.4ohms and probably go up in resistance with the rise in temp. On the board it clearly says R for resistor. But it has to be a special one.
          Resistor shows orange range silver gold and green lines.
          Thanks in adv...
          4 Photos
          07-21-2025, 09:49 PM
        • Loading...
        • No more items.
        Working...