How to confirm if you have a dead super io chip(kbc/ec)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mnciks11
    Badcaps Veteran
    • Aug 2019
    • 345
    • south Africa

    #1

    How to confirm if you have a dead super io chip(kbc/ec)

    Guys please help, which pins do you check, how to get clues that you have a dead Super IO chip(KBC/EC). What reading you take note of?

    I know that your laptop wont charge, you wont have a charging light
  • KvnTM
    Badcaps Veteran
    • May 2018
    • 434
    • Germany

    #2
    Re: How to confirm if you have a dead super io chip(kbc/ec)

    The KBC/EC usually controls all leds/fans. The bios rom is also tied to it. Looking at the SPI bus of it may also give you a clue.

    Pretty sure you could also look at the LPC bus.

    Comment

    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india

      #3
      Re: How to confirm if you have a dead super io chip(kbc/ec)

      There are no golden rules to be sure that kbc is bad. It depends on platform as well as your diagnostic skills. If all the caps near the kbc shows shorted or there is any pin of kbc shorted to gnd,+3V_EC shorted to gnd, kbc itself getting heated on applying power -its likely to be bad. Sometimes, even rsmrst missing is coz of bad kbc besides smbus,lpc issues.

      Comment

      Related Topics

      Collapse

      Working...