hello, this Dell turns on but the screen remains black, if I press the power button a second time the fan turns at max and turns off, the voltages I measured in the pads are all, I tried to warm the cpu / gpu chip but nothing has changed, could it be a bios problem?
Dell e5440 turns on but the screen remains black
Collapse
X
-
Re: Dell e5440 turns on but the screen remains black
Make sure RAM is good and compatible, and that you tried disconnecting any devices.
If CPU VCore is present, try to flash the BIOS.
Don't mess with the GPU or the CPU themselves randomly.OpenBoardView — https://github.com/OpenBoardView/OpenBoardView -
Re: Dell e5440 turns on but the screen remains black
Screen remains black-Do you mean backlit ok and no data??Comment
-
Re: Dell e5440 turns on but the screen remains black
yes, VCC_CORE is present 1.7v which of the two bios do you need to flash U1 or U2?Comment
-
Re: Dell e5440 turns on but the screen remains black
I flashed U2, the programmer ch341a told me file length, beyond range of will be ignored, I turned it back on, now the LED flashes 5sec on and 5 sec off and does not start, maybe the file is not right or I have to flash U1 too ?Comment
-
Re: Dell e5440 turns on but the screen remains black
Are you using those clip things to connect the ch341a to the bios chip while on motherboard? I have found that it doesn't always work 100%. I take off the chip and solder directly to ch341a pads, and yes, flashing U1 might work. But save your original .bin first of course. I have a e5440 board with dedicated graphics if you need those two .bins. I'm not sure what's wrong with it though. I know it's not the bios.Comment
-
Re: Dell e5440 turns on but the screen remains black
Are you using those clip things to connect the ch341a to the bios chip while on motherboard? I have found that it doesn't always work 100%. I take off the chip and solder directly to ch341a pads, and yes, flashing U1 might work. But save your original .bin first of course. I have a e5440 board with dedicated graphics if you need those two .bins. I'm not sure what's wrong with it though. I know it's not the bios.Comment
-
-
Re: Dell e5440 turns on but the screen remains black
everything works fine only when I turn it on the screen comes after 20 sec. I also downloaded a last 8 mega bios, downloaded from the dell site, but the problem remains, it can remain even so but if I can improve it is betterComment
-
Re: Dell e5440 turns on but the screen remains black
Clean the ME management engine firmware: https://winraid.level1techs.com/t/gu...lization/31277Comment
-
Re: Dell e5440 turns on but the screen remains black
You have a dual bios,you should flash U1 and U2 .If you can`t clean the ME yourself make a new post in the bios requests sub forum ,post both your original bios backups https://www.badcaps.net/forum/forumdisplay.php?f=40
EDIT: what is your service tag number .Last edited by SMDFlea; 06-24-2019, 03:27 AM.Comment
Related Topics
Collapse
-
Hello,
YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo
I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.
On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.
I also changed the screen because the PC fell and the screen was broken.
I changed the battery with a new and original battery.
I also had corrosion/oxidation on the... -
by smic717394Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on... -
by SwedishpowerHello
I have search everywhere for a solution for my problem, but cant find it anywhere.
When I was away to trow some garbage i always look in the electronic bin.
and this time i find a laptop.
Dell G3 15 3500, when I get home i look at the battery, add one harddrive, plug in the powercord.
the lamp for charmig is white.
Tryed to start it, the screen blink for a second, the keyboard lightsup, the fans and HD starts.
but no Dell logo.
I tryed with a hdmi cable to another screen, still black.
I started to search solution and tryed...07-06-2025, 06:18 AM -
Hi.
I kindly ask you to help me solve the problem.
Dell Precision 5510, motherboard AAM00 LA-C361P Rev:2.0
The board turns on, there is no image.
Read more. When the power supply is connected, the front panel indicators light up briefly.
When you press the power button, the button indicator lights up. The board works
there is no image, there is no matrix initialization, there is no image on HDMI.
When turned on, the fans do not spin, but when they warm up they start spinning.
When you turn off the button, the fans spin up to full speed for a short... -
by angel35I receive an wrong Dell E6430S, Not start no have screen.
Spec:
S mean Slim, not normal "fat" E6430, CPU soldered BGA CPU: i5-3340M SR0XB
Motherboard: Compal LA-7741P QAL70 r1.0 A00
Symptom:
Not start no have screen, no have backlight (full black), but board is working, Status LEDs ok, CPU start to hot and Fan spin up. Northbrigs also hot.
Main Battery charging, and can run form battery (run means you can turn off, CPU is hot, fan works)
Looks like everthings ok, but not work
I changed Memory, plug out SSD,(SSD... - Loading...
- No more items.
Comment