Sony SVE151D11L

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JessJ
    Member
    • Jul 2018
    • 17
    • United States

    #1

    Sony SVE151D11L

    My second project is this Sony Laptop. If it hooks to an external monitor I can operate the computer just fine. The screen looks like this 80% of the time. I have done all updates, power down and battery removal steps. I am thinking I need to replace the screen. Can anyone confirm my thinking?
    https://ibb.co/kJO6Yd

    Thanks,

    Jess
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: Sony SVE151D11L

    Looks like a faulty screen.

    Comment

    • JessJ
      Member
      • Jul 2018
      • 17
      • United States

      #3
      Re: Sony SVE151D11L

      Thanks diif, thats what I am thinking too. Ordered a new one tonight.

      Comment

      Related Topics

      Collapse

      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • Chrissygizmo
        Sony KD-55XG9505 lines on screen problem
        by Chrissygizmo
        Hello again everyone,

        This is my latest mission, to try getting this Sony tv back to normal working order…

        I've only just got it today, when you power it up everything is as should be, in fact it works perfectly for a few minutes then the screen starts getting horizontal lines on & eventually the full screen goes back, I will upload photos of the problem & also some photos of the board etc. You might notice that I'm busy trying the tape method, I'm not sure exactly where the clock lines are so I'm just guessing & hoping for the best lol . I've already tried...
        02-19-2025, 11:31 AM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • Adam Russ
        Black screen on Sony 65x90ch (65x900h from Costco)
        by Adam Russ
        Weird issue with this tv. Was streaming to the from a computer when it stopped working and the screen went black. Ever since then there has been. o image. Just a black screen. The audio works and yhe backlights do come on when it's powered on, it's just a black image. It presented like a backlight issue. So I finally got around to getting new backlights and a backlight tester. All of them test the same as the good backlights with the same voltages. There are no blinking lights. Just the white led at startup and when buttons on the remote are pressed signaling it's receiving from the remote....
        09-15-2024, 05:46 PM
      • Ihandyrepair
        sony 55X850D black screen no front white or red led light.
        by Ihandyrepair
        Hi guys

        strange one
        I have a dead Sony 55X850D
        when plug in, black screen, no front white or red LED, no back light no screen

        Voltages I get

        3.3v LD/power and main board
        reg 12V
        reg 19V
        3.3v on power on pin

        no Tcon on
        no tcon 12v
        no BL_on

        I do get BL_ERR 2.0v

        I tried to bypass it by ground it but still get same symptom

        I did also found a possible shorted cap on main board as it is showing 10 ohms when measure with meter
        or is possible the chip next to...
        08-07-2024, 04:58 AM
      • Loading...
      • No more items.
      Working...