looking for a good programmer that can flash *Laptop* ; *Tv* ; *Car* ; *Bios*
Announcement
Collapse
No announcement yet.
Good programmer
Collapse
X
-
Re: Good programmer
A single programmer can not be found to do them all properly. You need at least 2 powerful programmers. If you buy cheap programmers, you need 3 programmers. All the programmers which you buy, should be able to do programming for the following interfaces:
- SPI
- Jtag
- KBC
- TV Bios interface (that I do not know what it is.)
- ECU Bios interface (that I do not know what it is.)
A very good programmer is TNM5000 which is expensive. I do not know whether it is available in your country or not.
You can use a combination of EZP2010 and SVOD which are good and powerful.Last edited by caspian; 02-12-2018, 03:13 PM.
-
Re: Good programmer
i do my work with CH341A and hand made Willem 3.1 (i also have ver 5.0e for some new chips) and some hand made adaprers
https://www.ebay.com/itm/CH341A-STC-...sAAOSwgN5ZpSEe
https://www.ebay.com/itm/PCB5-0E-Wil...oAAOSwupladCDQ
cannto do sio chips with thoseIm Back... sort of...
Comment
-
Re: Good programmer
Originally posted by caspian View PostA single programmer can not be found to do them all properly. You need at least 2 powerful programmers. If you buy cheap programmers, you need 3 programmers. All the programmers which you buy, should be able to do programming for the following interfaces:
- SPI
- Jtag
- KBC
- TV Bios interface (that I do not know what it is.)
- ECU Bios interface (that I do not know what it is.)
A very good programmer is TNM5000 which is expensive. I do not know whether it is available in your country or not.
You can use a combination of EZP2010 and SVOD which are good and powerful.
1- I have the SVOD but I can not master its full use (I can not flash the KBC - ITE - ENE and other) I still have some trouble using.
2- I also have the TL866CS which works well for the moment but only flash bios. not the KBC ITE ENE NUVOTON and others
Comment
-
Re: Good programmer
Originally posted by ala_borbe View Posti do my work with CH341A and hand made Willem 3.1 (i also have ver 5.0e for some new chips) and some hand made adaprers
https://www.ebay.com/itm/CH341A-STC-...sAAOSwgN5ZpSEe
https://www.ebay.com/itm/PCB5-0E-Wil...oAAOSwupladCDQ
cannto do sio chips with those
You are a venerated master of the domain
I salute your efforts and all the help you do for the evolution of everyone
Comment
Comment