hi everyone i have this NEO BASIC B2235 laptop at first when i install normal windows 7 shutsdown after 30 minutes to 1 hours so i try lite version of windows 7 boots fine and no shutdown if i leave the laptop without doing anything but if i use installing softwares and drivers automatically shuts off. i already change the processor the same problem anyone can help on this please is this ME REGION problem? it is a core 2 duo 2ghz processor even i change to lower 1.6 the same issue i already add 1 330uf tantalum caps but the same issue.anyone can help me on this please
Announcement
Collapse
No announcement yet.
neo basic b2235 shutdown if heavy usage
Collapse
X
-
Re: neo basic b2235 shutdown if heavy usage
I have some comments about your situation :
1- You changed the CPU with another one , and i think it's used and may be defected too . In such case , you can always try a Dual core instead of an I core 2 if you have A reliable one . It's compatible .
2- Did you try another Rams ?
3 - You said you added a 330 microF. but maybe one of the other ones is leaky , so better replace all if it is a Token , or replace all the 330 microF on the cpu VCORE rails .
4 - If you did all the above , and the problem remain , then re-install any windows 7 , and install all the drivers , except the VGA's driver .
If the problem disappear or at least become very rare to occur , then you have a problem in the graphics chipset .
Comment
-
Re: neo basic b2235 shutdown if heavy usage
thanks for the response ill never tried cpu dual core i only try there cpu with core 2 duo i will try with dual core. the problem with this if i watch video no shuts off but when i install software like microsot office and net framework the installation cannot finished it automatically shuts off. ill try change the other tantalum caps ill tried already lot of rams form 2 gig to 4 gig but still the same issue
Comment
-
Re: neo basic b2235 shutdown if heavy usage
Originally posted by String2016 View Posthi everyone i have this NEO BASIC B2235 laptop at first when i install normal windows 7 shutsdown after 30 minutes to 1 hours so i try lite version of windows 7 boots fine and no shutdown if i leave the laptop without doing anything but if i use installing softwares and drivers automatically shuts off. i already change the processor the same problem anyone can help on this please is this ME REGION problem? it is a core 2 duo 2ghz processor even i change to lower 1.6 the same issue i already add 1 330uf tantalum caps but the same issue.anyone can help me on this pleaseASRock B550 PG Velocita
Ryzen 9 "Vermeer" 5900X
32 GB G.Skill RipJaws V F4-3200C16D-32GVR
Arc A770 16 GB
eVGA Supernova G3 750W
Western Digital Black SN850 1TB NVMe SSD
Alienware AW3423DWF OLED
"¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo
"There's nothing more unattractive than a chick smoking a cigarette" -Topcat
"Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat
"did I see a chair fly? I think I did! Time for popcorn!" -ratdude747
Comment
-
Re: neo basic b2235 shutdown if heavy usage
It could be overheating indeed, check CPU temperature (with SpeedFan for example).
As it appears to be a SiS chipset (I didn't check earlier), there is no ME region so that's not your issue.
Make sure you disconnect the battery and use a proper power brick.OpenBoardView — https://github.com/OpenBoardView/OpenBoardView
Comment
-
Re: neo basic b2235 shutdown if heavy usage
54°C is actually pretty cool if it's under load. If it's idle that's not that cool but it's not a high temperature either.
Start a stress-test and check what temperature the CPU reaches.OpenBoardView — https://github.com/OpenBoardView/OpenBoardView
Comment
Comment