Compaq with power issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • emmanuelbill1988
    Senior Member
    • Mar 2017
    • 100
    • ghana

    #1

    Compaq with power issue

    Please i have this Compaq presario CQ60,when my costumer brought it a caps was burnt on the board and after clearning and changing the spoilt capasitor i notice U47 ic was warming,i changed it and i have power on the board now but when i press the switch the laptop doesn't on,i made another check on the board and notices any ic on the board warms again,please can any one help me with the diagram of the board
    Astrosphere MCP MB
    07241-5
    48.4J103.051
    That is the board number,tnx in advance
  • piernov
    Super Moderator
    • Jan 2016
    • 4435
    • France

    #2
    Re: Compaq with power issue

    Should be this one.
    Attached Files
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

    • emmanuelbill1988
      Senior Member
      • Mar 2017
      • 100
      • ghana

      #3
      Re: Compaq with power issue

      Please which page do you think i should check?

      Comment

      • emmanuelbill1988
        Senior Member
        • Mar 2017
        • 100
        • ghana

        #4
        Re: Compaq with power issue

        Please mine is CQ60,any one

        Comment

        • piernov
          Super Moderator
          • Jan 2016
          • 4435
          • France

          #5
          Re: Compaq with power issue

          MB is Wistron Astrosphere, should be ok. Check if 3.3V/5V is present and if you have 3.3V on power button. Check if PM_RSMRST#, PWRBTN#_MCP and PM_SLP_S5# gets high after pressing power button.
          OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

          Comment

          • emmanuelbill1988
            Senior Member
            • Mar 2017
            • 100
            • ghana

            #6
            Re: Compaq with power issue

            After making the checks am not getting 3.3v under switch and U56 becomes hot when i put in the charger but power jack Led shows on,please what maybe the cause of U56 becoming hot?tnx

            Comment

            • mielta
              Badcaps Veteran
              • Apr 2015
              • 368
              • Germany

              #7
              Re: Compaq with power issue

              Hi
              Messure Pin8,16,17 from icU56

              Comment

              • emmanuelbill1988
                Senior Member
                • Mar 2017
                • 100
                • ghana

                #8
                Re: Compaq with power issue

                After measuring with charger plugged in i had
                Pin8-3.2v
                pin16-4.9v
                Pin17-0v

                Comment

                • mielta
                  Badcaps Veteran
                  • Apr 2015
                  • 368
                  • Germany

                  #9
                  Re: Compaq with power issue

                  messure Pin17 because a short to ground
                  also can U56 be defect

                  Comment

                  • emmanuelbill1988
                    Senior Member
                    • Mar 2017
                    • 100
                    • ghana

                    #10
                    Re: Compaq with power issue

                    After taking measure again i got
                    Pin8/3.2v
                    Pin16/18.9v
                    Pin17/4.9v
                    Thats when i plug in the charger,is U56 defeat?

                    Comment

                    • wisnak
                      New Member
                      • Apr 2018
                      • 1
                      • sweden

                      #11
                      Re: Compaq with power issue

                      I have the same motherboard CQ60 and the power jack led is on when i pluck the adapter and led 1 is on when i press the power button no led 3 and there no firther action and the the U48 start to be warm as usual and cpu fan not spinning, where i will start searching? any one has the boardview cause i cant finde som component like U47 or U56..?
                      than you in advance

                      Comment

                      Related Topics

                      Collapse

                      • Soulzink
                        Samsug washing machine. Power supply DC41-00189a board issue
                        by Soulzink
                        Hi everyone,

                        I am trying to fix a samsung washinmachine power supply main board.
                        I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
                        Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
                        The power supply board reference is the following: DC41-00189a
                        I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
                        04-19-2025, 06:26 AM
                      • Asraf Atb
                        Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
                        by Asraf Atb
                        Hi everyone,

                        Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

                        Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

                        I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
                        01-27-2025, 05:02 PM
                      • notallbad
                        TCL 55RP620K power board issue
                        by notallbad
                        Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
                        0% p_dim at 1.65v and a_dim at 1v
                        50% p_dim at 3.3v and a_dim at 1.65v
                        100% p_dim at 3.3v and a_dim at 2.88v

                        Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

                        Leds are 2 rows of 15 6v leds.

                        On inspection of the power board found diode MBR3200 shorted so replaced with...
                        Today, 05:45 AM
                      • Tynan Dill
                        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                        by Tynan Dill
                        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                        Upon bringing it home and plugging it up, it showed a standby light.

                        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                        The screen seems to blackout and stay black, but with a flashlight I can see the display.

                        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                        Assuming...
                        11-22-2024, 01:46 PM
                      • Document Archive
                        HP Compaq Compaq SG3-240ES Compaq SG3 220 Specification for Upgrade or Repair
                        by Document Archive
                        This specification for the HP Compaq Compaq SG3-240ES can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Compaq Compaq SG3-240ES boardview and Compaq Compaq SG3-240ES schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
                        09-12-2024, 03:44 PM
                      • Loading...
                      • No more items.
                      Working...