Hello,
One more thread for this board. Seeking a lot old threads. No help.
Bios already flashed with no result.
Board shut off almost immediately after button pressed.
When charger is plugged in the charge led is on for some seconds and then off.
checked +3V_ALW +5V_ALW +12V_ALW all seems ok.
Also immediately after button pressed checked the other voltages and seems to work before shut down.
Only on PL7 there is no voltage. I can measure the battery's voltage when it is plugged in , but no increase when power button pressed. (logically this must be increased in order to charge the battery)
AD_ID is 1.6v
Should i try another bios flash or it is an electrical fault?
One more thread for this board. Seeking a lot old threads. No help.
Bios already flashed with no result.
Board shut off almost immediately after button pressed.
When charger is plugged in the charge led is on for some seconds and then off.
checked +3V_ALW +5V_ALW +12V_ALW all seems ok.
Also immediately after button pressed checked the other voltages and seems to work before shut down.
Only on PL7 there is no voltage. I can measure the battery's voltage when it is plugged in , but no increase when power button pressed. (logically this must be increased in order to charge the battery)
AD_ID is 1.6v
Should i try another bios flash or it is an electrical fault?
Comment