Asus N71VN burned Power Connector

[passete]

Re: Asus N71VN burned Power Connector

Is this socket that you are talking ?
Pin is strait ?

[passete]

Re: Asus N71VN burned Power Connector

I think that i damned, i still have a short between - and the H6538 Point ...
Normal or Not ?

[stj]

Re: Asus N71VN burned Power Connector

ok all is good.

that pin probably wont bend, cut it so it wont go into the board.
then put the connector on the board and put a thick jump wire between the back of the socket and the place the 3 inductors went to.
then test it.

if it works and charges, we can do it better with the inductors and cap back in use.

[passete]

Re: Asus N71VN burned Power Connector

ok all is good.

and the place the 3 inductors went to.

I need to resolder the 3 inductors ?
If Not, where should i solder +19V ?

[stj]

Re: Asus N71VN burned Power Connector

this is where you want the socket pin to connect.

you can use a wire,
but even better, if you can put the inductors back standing vertical with the wire across the top of them.

[stj]

Re: Asus N71VN burned Power Connector

wait - i have a better idea - making a foto now.

[stj]

Re: Asus N71VN burned Power Connector

like this:
put the inductors back facing the other way.
then put a wire across them.

[WINJOKE]

Re: Asus N71VN burned Power Connector

Hi everyone im not able to make a new post because im a new momber but i hop to get your help about my probook 650 : i need bios fil ,the part number of yhe mainboard is 6050a2566301-mb-a03

[stj]

Re: Asus N71VN burned Power Connector

i think you can make a new post, who makes your laptop?

[passete]

Re: Asus N71VN burned Power Connector

Before your Sugestion i've tried this (photo) :
Once i approach the Ground to any of the - Poles, i get sparks .
As you can see, i continue to grind/sand, and the short is still present on this area.


EDIT: in my humble opinion, the short is on the - ground side, then i'm ....

[stj]

Re: Asus N71VN burned Power Connector

???

if you put 19v on the pads that connect to the fet, does it work?

[passete]

Re: Asus N71VN burned Power Connector

???

if you put 19v on the pads that connect to the fet, does it work?

Can you point this pad ?

[stj]

Re: Asus N71VN burned Power Connector

i did - in my foto

[passete]

Re: Asus N71VN burned Power Connector

i did - in my foto

This is what i've done on post 30.
Sparks on, when i connect the - on the short area

[stj]

Re: Asus N71VN burned Power Connector

so you put - on the area for -,
and + on the marked area, but NOT in the original hole in the board?

[passete]

Re: Asus N71VN burned Power Connector

so you put - on the area for -,
and + on the marked area, but NOT in the original hole in the board?

Ok, let try to explain, see the photo posted.
+19 was soldered on the midle pad
Ground or - was aplied on lower left hole, like on the photo.

Hope that you understand what i'm trying to explain

[stj]

Re: Asus N71VN burned Power Connector

o.k. where was the spark?

[passete]

Re: Asus N71VN burned Power Connector

o.k. where was the spark?

Near the center of the black hole area, lol !
On that region.

[passete]

Re: Asus N71VN burned Power Connector

Here a little video of the sparks

Maybe it's time for the Dremel, like someone sugested previously , lol

[stj]

Re: Asus N71VN burned Power Connector

let it spark till it's burned away!