A1278 "Stagelighting" on screen + high freq whine

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 850csi
    Member
    • Jan 2016
    • 23
    • USA

    #1

    A1278 "Stagelighting" on screen + high freq whine

    Hey all,

    Picked this up cheap intending to use it as a desktop (mid 2009 mb991ll/a) It works perfectly for that purpose, but I'm tempted to try to fix its lcd anyways. It is remarkable how fast these old things feel with El Capitan.

    The display has the so-called "stagelight" effect at bottom:



    Obviously far more noticeable with lighter colors.

    In addition, the lcd will sometimes "freeze" and get washed out with lines and other gibberish:



    The screen becomes unresponsive when this happens. When this occurs, some strong pressure to the lower right portion of the bezel and/or moving the display restores the image.

    In addition, at anything less than full brightness there's a quiet high-pitched [incredibly annoying!] "whine" that gets quieter as brightness is lowered.

    If I had to guess, two independent issues, one perhaps with the power board and the other with the LVDS cable or hinges? Thoughts welcome.
    Last edited by 850csi; 01-23-2016, 08:26 AM.
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31015
    • Albion

    #2
    Re: A1278 "Stagelighting" on screen + high freq whine

    led strip needs replacing.
    some are dead, the working ones are stressed by overcurrent.
    that may be causing the whine too.

    it may even have a damaged driver chip.

    Comment

    • 850csi
      Member
      • Jan 2016
      • 23
      • USA

      #3
      Re: A1278 "Stagelighting" on screen + high freq whine

      Originally posted by stj
      led strip needs replacing.
      some are dead, the working ones are stressed by overcurrent.
      that may be causing the whine too.

      it may even have a damaged driver chip.
      Thanks! So it needs a new display, then, and should be fine?

      With regard to the bolded, any way to check on this? Isn't the fact that physical manipulation of the screen resolves/affects the situation suggestive of there being nothing wrong on the logic board itself? Or are you referring to the [constant] "stagelighting" rather than the other issue? Sorry, n00b here.
      Last edited by 850csi; 01-23-2016, 02:54 PM.

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 31015
        • Albion

        #4
        Re: A1278 "Stagelighting" on screen + high freq whine

        i was refering to the led driver,
        when they blow they usually have a hole in them!
        take the panel out and examine the small square chip near the led strip cable.

        Comment

        • 850csi
          Member
          • Jan 2016
          • 23
          • USA

          #5
          Re: A1278 "Stagelighting" on screen + high freq whine

          Originally posted by stj
          i was refering to the led driver,
          when they blow they usually have a hole in them!
          take the panel out and examine the small square chip near the led strip cable.

          You're referring to it as shown in this picture, correct?



          Mine looks fine as far as I can tell...



          (really appreciate your help & patience)

          Comment

          • stj
            Great Sage 齊天大聖
            • Dec 2009
            • 31015
            • Albion

            #6
            Re: A1278 "Stagelighting" on screen + high freq whine

            that looks o.k.

            i'm surprised it's there though,
            on most laptops it's on the display panel itself, not the mainboard.

            Comment

            • dellxps15
              Badcaps Legend
              • Feb 2014
              • 1588
              • italy

              #7
              Re: A1278 "Stagelighting" on screen + high freq whine

              first picture looks like a bad led , while second picture looks more like bad panel or bad lcd cable. if u can try another lcd cable and lcd.

              Comment

              • 850csi
                Member
                • Jan 2016
                • 23
                • USA

                #8
                Re: A1278 "Stagelighting" on screen + high freq whine

                Originally posted by stj
                that looks o.k.

                i'm surprised it's there though,
                on most laptops it's on the display panel itself, not the mainboard.

                Yeah I figured there was something being lost in translation - I only knew this because of extensive googling, got that image from ifixit. Can't verify the accuracy myself.

                Originally posted by dellxps15
                first picture looks like a bad led , while second picture looks more like bad panel or bad lcd cable. if u can try another lcd cable and lcd.
                Thank you both for your help. We'll see... I'm tempted to try getting a replacement cable and see what happens but taking the screen apart to get at it is quite an ordeal. Was mostly trying to figure out if it's worth the effort - can I be reasonably confident my logic board is ok?

                Comment

                • dellxps15
                  Badcaps Legend
                  • Feb 2014
                  • 1588
                  • italy

                  #9
                  Re: A1278 "Stagelighting" on screen + high freq whine

                  try with a dvi adapter and see if image is ok.

                  try also a pram reset and smc reset before change lvds cable as u have to unglue the glass (very noisy part)

                  also when u have that king of lines, try open close the lcd and see if problem still present or disappear. if disapper probably a bad lvds cable, if still present probably bad lcd.

                  check also temperature of component with hardware temperature monitor if they re ok (max 100°)
                  Last edited by dellxps15; 01-24-2016, 10:14 AM.

                  Comment

                  • 850csi
                    Member
                    • Jan 2016
                    • 23
                    • USA

                    #10
                    Re: A1278 "Stagelighting" on screen + high freq whine

                    Have been using it as a desktop and it works like a champ

                    PRAM/SMC didn't resolve anything

                    When I have the screen cut out like in the 2nd image, some pressure to the bezel or moving the display sometimes resolves it. The spotlights are there ever-presently, though.

                    Will check on temps.

                    Comment

                    • 850csi
                      Member
                      • Jan 2016
                      • 23
                      • USA

                      #11
                      Re: A1278 "Stagelighting" on screen + high freq whine



                      Temps look good. This was taken with the screen fading in and out. Sorry forgot to switch to Celsius first.

                      Comment

                      Related Topics

                      Collapse

                      • Ryan.man
                        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                        by Ryan.man
                        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                        02-04-2025, 12:23 PM
                      • reformatt
                        Macbook Air M2 A2681 Kernel panics after screen replacement
                        by reformatt
                        Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                        It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                        07-31-2025, 08:37 PM
                      • smic717394
                        iphone XS turns off when press on screen.
                        by smic717394
                        Hi,

                        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                        07-25-2024, 10:16 AM
                      • Chrissygizmo
                        Samsung UE55JU6800K half screen dark
                        by Chrissygizmo
                        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                        02-10-2025, 12:33 AM
                      • CroBUTKO91
                        can you damage screen panel with high voltage
                        by CroBUTKO91
                        hi i have philips led tv i had vertical lines all over the screen so i was testing voltages on board connected directly to screen below t-con
                        i accidently shorted two caps just above flat cables going to screen 20v and 2v and the 2/3 of the left side of the screen has gone white but vertical lines are still there i still have all the voltages on caps nothing is shorted so im just wondering is it posible i damaged the screen (burned pixels) when i shorted caps ot its posible the t-con board got damaged, thank you
                        07-25-2022, 06:31 AM
                      • Loading...
                      • No more items.
                      Working...