Announcement

Collapse
No announcement yet.

Hp g62

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Hp g62

    Hello guys, this one is making me some troubles now.
    Came in with "not starting" case. I've plugged it in started and voila it starts, stays on for about 1-2 mins, then auto turn off (no overheat), afterwards it wont start for quite some time only blinks on all leds.
    If you discharge it (1min holding power button without power cord), nothing happens, but if I leave it for more then 40mins off, it will repeat the process.

    Didn't find anything similar, could it be the bios or the gpu perhaps?

    #2
    Re: Hp g62

    I don't think s the bios, you can try with other cpu and see.
    The Night Drop Down, I Will Keep Try Until..., You Never know.
    Dushi Kòrsou, Nos Tei.

    Comment


      #3
      Re: Hp g62

      Damn work had no time to check it out. Did today, now I get to install everything and boot up to windows but then again it I can install the HD4200 in it, it even installs the HD5400 but it won't switch to it, stays on the HD4200, smells like a gpu fault.

      I've read on the interest a lot about this one, and mostly people refer to the drivers, I've tried like 10 versions and get different outputs namely sometimes it won't install the
      HD5400 and sometimes will, but I can never use it, I see it only installed.

      Comment

      Working...
      X