Announcement

Collapse
No announcement yet.

Dead MacBookPro 13 late 2011

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dead MacBookPro 13 late 2011

    Hello badcaps pro´s
    I could need some help here. I bought a broken MBP for using a good touchpad and battery. But now i am curious what could have happen that the Book is dead. The owner told me this story -> Hy tried to change the RAM and couldnt manage to get the screw out of the case. So he tried to "open" the case with bending the metal away (yee... i don´t know why) It was the screw in the corner close to the magsafe port. Now attaching the power without battery the LED is blinking in light green and orange.. took the bord out and saw two orange components under some kind of glue.
    Please could someone tell me why this thing looks burned ?
    (guess he shorted something with the screwdriver)
    greetings
    Attached Files

    #2
    Re: Dead MacBookPro 13 late 2011

    what i already saw / heard ->
    when i power the logicboard the light is dimmed green... then after a few seconds it starts to blink when it finally switches between green and orange... the same pattern the light flickers there is a VERY VERY low clicking noise on the motherboard. Any ideas ?

    Comment


      #3
      Re: Dead MacBookPro 13 late 2011

      Originally posted by storexxm View Post
      Hello badcaps pro´s
      I could need some help here. I bought a broken MBP for using a good touchpad and battery. But now i am curious what could have happen that the Book is dead. The owner told me this story -> Hy tried to change the RAM and couldnt manage to get the screw out of the case. So he tried to "open" the case with bending the metal away (yee... i don´t know why) It was the screw in the corner close to the magsafe port. Now attaching the power without battery the LED is blinking in light green and orange.. took the bord out and saw two orange components under some kind of glue.
      Please could someone tell me why this thing looks burned ?
      (guess he shorted something with the screwdriver)
      greetings
      Freund er hat dich angelogen, er hat versuch diesen ISL62... chip zu ersetzten seh ich, deswegen auch diese hitzespuren am Kleber!!

      Also er hat insgesamt das board erhitzt würde sagen mit einer Heißluftpistole, gebracht hat es wahrscheinlich nichts er hat bestimmt noch mehr zerstört...

      Comment


        #4
        Re: Dead MacBookPro 13 late 2011

        Oh.. heißt, dass diese 2 Bauteile durch einen Kurzschluss angeschmort sind, ist eher unwahrscheinlich?
        Na wird dann wohl als Totalschaden weiterverscherbelt.. schade

        Comment


          #5
          Re: Dead MacBookPro 13 late 2011

          i dont understand german language, but looking the picture looks like u7000 isl6259ahrtz have been heated up. try replace it with a brand new one and see what happens.

          Comment


            #6
            Re: Dead MacBookPro 13 late 2011

            is this a component which is easy to buy ?

            Comment


              #7
              Re: Dead MacBookPro 13 late 2011

              yes u can find it easly on ur ebay country.

              Comment


                #8
                Re: Dead MacBookPro 13 late 2011

                Originally posted by storexxm View Post
                is this a component which is easy to buy ?
                Diese bauteil lädt denn Akku auf, hat mit starten des Notebooks nichts am Hut!!

                Nein Kutzschluss nicht, jedoch hat er gebastelt und man weiß nie was er kaputt gemacht hat und was fehlt....

                Wenn du es Verkaufen willst mache mir ein Angebot, ich würde es für teile kaufen, wenn der preiß stimmt!!
                Last edited by tata123; 11-13-2015, 01:42 PM.

                Comment


                  #9
                  Re: Dead MacBookPro 13 late 2011

                  Originally posted by dellxps15 View Post
                  i dont understand german language, but looking the picture looks like u7000 isl6259ahrtz have been heated up. try replace it with a brand new one and see what happens.
                  yes dellxps, your right,i have tell him the same as you, the board or ISL chip has been heatet or change and if there was a repair you can destry more than the board ist complett dead.....
                  Last edited by tata123; 11-13-2015, 01:42 PM.

                  Comment


                    #10
                    Re: Dead MacBookPro 13 late 2011

                    I don't believe I have to say this but please check Louis rossmann's video on YouTube .

                    One thing thought I really hate him for being self center and ego maniac with a lot of swearing , he's got a lot of experience with macbooks.

                    I only watch a couple of his videos and he's right.

                    There are a few things that you need like the basic one wire line from charging adapter to always voltage.

                    How to check its easy if your in domain but he keeps telling everyone but I think he does not get it.

                    Use your brain! Use your brain its easy.
                    Not everybody got the skills like him.

                    Check his videos you will fix your Mac if you pay attention.

                    Be patient . you will get there
                    Just cook it! It's already broken.

                    Comment

                    Working...
                    X