MacBook Air A2681 with no image and no trackpad

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • daltonjr.
    Senior Member
    • Jul 2016
    • 51
    • Austria
    #1

    MacBook Air A2681 with no image and no trackpad

    Hi,,

    I have replaced the screen on this machine, then suddenly there was no more image and the trackpad click stopped working. I can still hear the chim at start up. I have tried another motherboard in this machine and it works normally.

    I think the screen and the trackpad are not e​ve​n on the same power line.

    Any idea?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • rynr
      MacBook Air M2 A2681 no Trackpad
      by rynr
      Hello,
      I have been following the posts in the forum for some time now and have learned a lot. I would first like to thank you for this and hope that it will continue for a long time.

      I received the MacBook in DFU. The recovery always failed with error 1. After some search, I was able to find a defective inductor (LT202).
      After replacing the component, I was able to successfully complete the DFU restore. Unfortunately, the trackpad and keyboard where still without function.

      So i measured all voltages and diodereadings on the JT400 connector. ...
      11-04-2024, 09:56 AM
    • tommy97
      MacBook A2681 - Problem with trackpad
      by tommy97
      Hi,

      I do have problem with MacBook A2681 every time i close the lid, when re-open trackpad does not work, i need to close it again and the re-open and it's come back to normal, i've tried software reset, inspected the board, replaced screen angle sensor (from Apple), nothing changed, any ideas?
      04-06-2024, 04:16 AM
    • No Lan
      [Macbook pro A1708] [Boot loop] [Trackpad ?]
      by No Lan
      Hey everyone,

      Usually, I'm not the type to ask for help, but this time, I'm calling on your wisdom and expertise I've seen what this community can do, so I'm pretty sure you guys can help me out.

      Here's the deal: I noticed my MacBook got stuck in a boot loop. After opening it up and doing some initial troubleshooting, I found that the boot loop stops only when the trackpad is unplugged.

      Now, just so you know, the trackpad actually works — I tested it with another motherboard and it's all good. Same for the cable, no issues there. The problem is only...
      05-24-2025, 03:09 PM
    • Skrndelj
      Apple Macbook Air M1 A2337 Trackpad problem
      by Skrndelj
      Hello all,

      I am repairing a Macbook A2337 and i have a problem
      The Macbook is stuck in restore as someone before me tried a DFU restore and bricked the device, now i can't do a restore as AC2 throws error 1 which is related to the trackpad.
      When i turn on the device i get the trackpad click for a few moments and then nothing, i tried 7 trackpads and 7 trackpad flats, i know all 7 are functioning okay, especially one as i use it for testing and DFU restore.
      I inspected the whole board and everything seems fine.
      Can anyone help me as i didn't fiddle with trackpad...
      06-11-2024, 04:26 AM
    • kuba2102
      Macbook Air M2 A2681 Keyboard and trackpad not working with certain LCD
      by kuba2102
      Hello. As in description, TP and KB are not working when connected to the OEM display (working one). The angle sensor was damaged by a water, other than that I cannot find any more liquid damage or even stains. I took the bezel off the LCD to inspect but it looks intact. when I connect a spare LCD it works like a charm. I never seen before a laptop where KB and TP would work due to a display that is displaying without any issue. Any idea?
      05-14-2025, 04:47 PM
    • Loading...
    • No more items.
    Working...