MacBook A1990 26 Pin Connector

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Strolch
    Badcaps Veteran
    • Nov 2017
    • 245
    • Deutschland

    #1

    MacBook A1990 26 Pin Connector

    Hello, can anyone tell me where I can get this 26-pin FPC connector? What is the connector for?So that one's also for the Touch Bar. I thought only the FPC at the top was for the Touch Bar. But where can I get it? I can't find the connector online. I only found the 22nd pin. Thank you.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by Strolch; 09-03-2025, 01:39 AM.
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14996
    • Canada

    #2
    The Touchbars (aka DFR) consist of 2 components, the CTP (capacitance touch panel) and the MIPI DSI interface.

    As expected, each is a custom part made for Apple. Of course available in Asia with a few creative search keywords.

    The part # for the 26 pin connector is DF40SG(1.5)-26DS-0.4V = J5110. Best to request the 'J5110 connector for A1990' when chatting with suppliers in Asia.

    For the touch component, it is AA07-S022VA1 = J5100.

    Comment

    • Strolch
      Badcaps Veteran
      • Nov 2017
      • 245
      • Deutschland

      #3
      Hi mon2, I bought the 22 pin from Ali but I can't find the 26 pin FPC.

      Comment

      • mon2
        Badcaps Legend
        • Dec 2019
        • 14996
        • Canada

        #4
        https://www.hklrf.com/DF40PG15-26DS-04V51_6285.html

        We will be in Asia in October and determined to find a lower cost option for these parts. Confident they exist.

        Comment

        • Strolch
          Badcaps Veteran
          • Nov 2017
          • 245
          • Deutschland

          #5
          It's very cheap here. I can't just manage Chinese
          Attached Files

          if you find these attachements useful please consider making a small donation to the site

          Comment

          • mon2
            Badcaps Legend
            • Dec 2019
            • 14996
            • Canada

            #6
            We did manage to setup an account with Taobao. Was not simple to do but succeeded after following a few YT videos.

            From the published price, the connector is ~$1 USD which is fair for low qty purchases.

            The trick to Taobao app is to select Singapore as the country to deliver and then the app will be all English. Find and fill you cart and before checking out, switch to Chinese again but with your real address for shipping. We did this earlier this year on some development tools which are only available on this portal.

            Review this video:
            https://www.youtube.com/watch?v=KGRr...el=AttiqueStic
            Last edited by mon2; 09-03-2025, 10:05 AM.

            Comment

            • Strolch
              Badcaps Veteran
              • Nov 2017
              • 245
              • Deutschland

              #7
              And then they send it to Germany?

              Comment

              • mon2
                Badcaps Legend
                • Dec 2019
                • 14996
                • Canada

                #8
                Yes. You still register the app with your true delivery address but to view in English you must temp switch to Singapore. They are testing the same app in English but only if you select Singapore. Watch the above video on the full process. Then you add to your cart in English and then before paying, switch back to your home country and the shipping fee will be for your true delivery address. Very similar to Aliexpress.

                Comment

                • reformatt
                  Badcaps Legend
                  • Feb 2020
                  • 1556
                  • Australia

                  #9
                  What about this listing on Ali?

                  https://www.aliexpress.com/item/1005...origin_prod%3A

                  Failing that, steal it off a donor board. Should be plenty of dead A1990/A2141 boards floating around with dead SSD's

                  Comment

                  • Strolch
                    Badcaps Veteran
                    • Nov 2017
                    • 245
                    • Deutschland

                    #10
                    Hi, i think the Nr 4 is right! 10Pcs is ok for 17€ thx
                    Attached Files

                    if you find these attachements useful please consider making a small donation to the site

                    Comment

                    • Strolch
                      Badcaps Veteran
                      • Nov 2017
                      • 245
                      • Deutschland

                      #11
                      I did buy

                      Comment

                      • mon2
                        Badcaps Legend
                        • Dec 2019
                        • 14996
                        • Canada

                        #12
                        Good find!

                        Here is another that we will use:

                        https://click.world.taobao.com/_b.FKmeW 「Df40Pg (1.5)-26Ds-0.4V (51) 26Pin 0.4mm Pitch Female Board-To-Board Connector」
                        Tap and open Taobao to view

                        Comment

                        • Strolch
                          Badcaps Veteran
                          • Nov 2017
                          • 245
                          • Deutschland

                          #13
                          Cool. I will register there in the next few days!

                          Comment

                          Related Topics

                          Collapse

                          • silver60618
                            Macbook Pro A1990 - Battery not detected after connector torn off
                            by silver60618
                            Hi Gang, Im working on Macbook Pro A1990, the battery connector was torn off during friend trying to replace battery. I soldered on the connector back, and created traces. The battery does charge (according to amp meter), and does power on battery only. But the signal detect line maybe done incorrectly, and the macbook shows "X" over battery icon, and "Service Recommended" on new battery

                            Can somebody point me to which of these connector pins is responsible for battery detect/data line? Pin 4 on schematic had a nub on the trace, im not sure if that is important,...
                            11-12-2025, 06:36 PM
                          • Document Archive
                            MacBook Pro 15" A1990 Touch Bar 820-01814-01, 820-01814-A, 820-01814-B Schematic
                            by Document Archive
                            MacBook Pro 15" A1990 Touch Bar 820-01814-01, 820-01814-A, 820-01814-B Schematic...
                            10-08-2024, 01:46 AM
                          • bussincaps
                            MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                            by bussincaps
                            Hello All,

                            tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                            Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                            eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                            Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                            I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                            08-03-2023, 12:57 PM
                          • alfredodinolfo
                            MacBook Pro 2019 (A1990)
                            by alfredodinolfo
                            mb code:820-01827-A;
                            sn:C02Z349ALVDR;
                            i9 32GB Ram 1TB

                            Hi, I found short on one of 6 black nand (total 1TB).
                            i removed all 6 nand ( voltages all ok) and now i want to program with JC P15 but for A1990 2019 there is only 512GB configuration.
                            I try A2141 1TB configurazion with TSB4228 but the position on pcb is different ( U9300 and U9400 is no stuff on A1990 but present on A2141 and U8800 and U8900 is no stuff on A2141 but present on A1990 )
                            macbook with A2141 configuration run on recovery but don't complete it.​
                            anyone can help me?
                            05-26-2025, 09:27 AM
                          • Hauke
                            MacBook Pro 15" A1707, 2016 - No Display and Touch Bar
                            by Hauke
                            Hi, I am asking for a little troubleshooting advice.

                            The laptop seems to boot up fine. Caps lock is working, the touch pad has haptic feedback, and even the "charger plugged"-sound is present.
                            Power consumption is about 15-30W at boot and idles at about 20W.

                            Unfortunately, the display and the touch bar are completely black (No signal and no backlight).
                            I don't get a signal on an external USB-C display either. Also not in safe mode.
                            I noticed that only the left fan (from the bottom side, hinge on top) seems to spin up. I think...
                            09-03-2025, 04:04 AM
                          • Loading...
                          • No more items.
                          Working...