Strolch
Badcaps Veteran
Last Activity: 12-15-2024, 11:57 AM
Joined: 11-11-2017
Location: Aurich Niedersachsen
-
Ipad Pro Gen 3 A1876 No backlight.
Hello, an SMD burned out on the logic board of my Apple IPad Pro Gen 3 A1876. A pin on the display connector was bent. I think it happened there. Can someone give me the data of the defective part or is there a board view and schematic for the logic board of the Ipad A1876? Thanks and greetings...
-
After switching on I only see this picture, like on the link! And the keyboard backlight turns on
[url]https://support.hp.com/de-de/document/c01370952#:~:text=Wenn%20der%20Monitor%20in%20den,abwechselnd%20rot%2C%20grün%20und%20blau.&text=Die%20farbige%20Anzeige%20dient%20zur,farbige%20Anzeige%20nicht%20mehr%20erscheinen[/url].https://After switching on I only se...nd%20blau.&texLeave a comment:
-
Is this the Bios Chip?
I have already replaced the chipLast edited by Strolch; 12-06-2023, 11:00 AM.Leave a comment:
-
HUAWEI MateBook X Pro MACHC-WAE9LP Boardview need.
Hi I need the Boardview for my Huawei. After update it will not more start. No Bios nothing. THX -
Re: T203 AsProgrammer Error
where can I find the serial number with winhex?I can't find it ;-)Leave a comment:
-
Re: T203 AsProgrammer Error
4. According to the new operation method, read the original ROM data, then change the new serial number, write the data back to the ROM chip, and finally use the T203 software to bypass the activation lock.
5. Remember: After changing the serial number and writing back the ROM data, you must not enter the DFU mode to use the "Apple Configurator" software to restore the T2 system.
I don't understand what to do after writing the ROM. Shouldn't I use the Apple Configurator?Leave a comment:
-
Re: T203 AsProgrammer Error
Hello mon2, yes I made it now. I was able to read and write to the T2 ROM. Apparently the serial number has been swapped. I did the restore too. But now I have to activate it or not? The Mina T2 Activation was not on the USB stick, I loaded it from the network, but it does not work. What else has to be done? Do I still have to pay for software to activate? I hope it's okay now? I bought the t203 and thought it would work with it? greetingLeave a comment:
-
T203 AsProgrammer Error
I bought the T203 programmer and unsoldered the T2 ROM chip from the A2159 and put it in the T203. Then connected to Win 8 via USB AsProgrammer started and when I want to read it an error comes up! See pictures. I also tried it on Win 10.
Hello, I have a problem. I unsoldered the chip from my Mac A2159 and put it in the T203. When I open As Programmer and click on Read ID I get the error message Error connecting CH341! What's wrong there? Please help. Thanks... -
Re: macbook pro a1989 power on but black screen
Louis addressed this design issue a couple of times. Pin 43 (PPVOUT_S0_LCDBKLT) and pin 1 (EDP_INT_AUX_N) are next to each other on J8500. Any liquid damage to this connector could potentially allow this high voltage to enter this data line and damage the CPU. Doesn't the A1989 have a chip like the U9850 that can be swapped out, like the A1707? Is the CPU definitely affected in this case? On my board, pin 43 and pin 1 also had a short circuit!Leave a comment:
-
Re: A2338 820-02020-a
I can not open the Shop. that is Germany. Not normal! I buy it now from Digital Key
Web-Kennung: 336011520
Artikel im Warenkorb: 1
Zwischensumme: 0,84 €
Versand: 18,00 €
MwSt.: 3,58 €
Gesamt: 22,42 €Leave a comment:
-
Re: A2338 820-02020-a
I can't open the link in Germany. Worse than in China here in Germany!Leave a comment:
-
Re: A2338 820-02020-a
Oh I didn't see pin 2 on the schematic. It was late after work ;-))Leave a comment:
-
Re: A2338 820-02020-a
I buy from Ali, do you have a link where I can get the partsLeave a comment:
-
Re: A2338 820-02020-a
yes 100%Leave a comment:
-
Re: A2338 820-02020-a
Hello, can anyone tell me what the parts are or where I can get them? thanksLeave a comment:
-
A2338 820-02020-a
I have a MacBook Pro A2338 with liquid damage. And some parts are broken. including The 2 pcs CF120 and CF 121 USBC_ATC1_R2D_C_P<1>. I have different LogicBoards from which I can take parts. But I can't find you. Can someone tell me exactly what SMD parts are? thanks... -
Re: Macbook A1990 820-01041-A No Power on
Awake 0,0015 V It also always goes on of 20V then 0Leave a comment:
-
Re: Macbook A1990 820-01041-A No Power on
L7030 is hot...Leave a comment:
-
Re: Macbook A1990 820-01041-A No Power on
F7000 Pad 1 it's 5v it then goes up to 12v and then it goes back down to 5v and then it goes back up to 12v back and forthLeave a comment:
No activity results to display
Leave a comment: