macbook pro late 2012 A1425 boot issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dqtech
    Badcaps
    • Jul 2018
    • 630
    • N/A

    #1

    macbook pro late 2012 A1425 boot issue

    this is my first time having this issue...everytime turn on will have this kind of word before apple logo appear....and sometimes just stuck here and have to force shutdown and turn on again....anyone have solution for this?
    Attached Files
  • dqtech
    Badcaps
    • Jul 2018
    • 630
    • N/A

    #2
    this is full video...even after reformat macos also have this kind of word before apple logo...please help how to disable this....
    Attached Files

    Comment

    • dqtech
      Badcaps
      • Jul 2018
      • 630
      • N/A

      #3
      problem solve...i did PRAM and everything goes to normal

      Comment

      Related Topics

      Collapse

      • Ancient1
        MacBook Pro 2012 A1398 : Battery BMS circuit repair OR can it boot WITHOUT a battery ?
        by Ancient1
        Hi
        I received such Laptop as junk. Opening it I saw a lot of whitish water residue , but no corrosion really ( few coils have small brown rust marks, no green copper ).
        I cleaned all thoroughly and interestingly , its the Battery BMS board that has the real corrosion spots.. under the protective clear Goo !!

        I want to try and power up the laptop

        Battery is swollen. But I don't want to buy a new battery right now , of course .

        I started work on the BMS by zooming in on green spots . 2 VIAs are filled with rusted copper goo - who knows...
        04-17-2024, 12:46 AM
      • No Lan
        [Macbook pro A1708] [Boot loop] [Trackpad ?]
        by No Lan
        Hey everyone,

        Usually, I'm not the type to ask for help, but this time, I'm calling on your wisdom and expertise I've seen what this community can do, so I'm pretty sure you guys can help me out.

        Here's the deal: I noticed my MacBook got stuck in a boot loop. After opening it up and doing some initial troubleshooting, I found that the boot loop stops only when the trackpad is unplugged.

        Now, just so you know, the trackpad actually works — I tested it with another motherboard and it's all good. Same for the cable, no issues there. The problem is only...
        05-24-2025, 03:09 PM
      • Gigabit2
        MacBook Pro 15" Late 2013 no chime or boot but green light on charger
        by Gigabit2
        I have a late 2013 MacBook Pro 15" here, with light on charger but does not boot with or without battery installed. Can anyone provide assistance?

        I checked these rails:

        PPDCIN_G3H - 19.80 (20V mode)
        PP3V42_G3H - 3.41 (20V mode)
        PPBUS_G3H - 12.56 (20V mode)
        PP3V3_S5 - 3.32 (20V mode)

        These look okay to me, where should I look next?
        05-07-2022, 09:56 AM
      • Rezendes
        Looking for 13" Macbook Pro A1278 mid 2012 820-2565-A Schematics and Board View
        by Rezendes
        Hello, I am looking for any and all files related to the mainboard for 820-2565-A (13" Macbook Pro A1278 mid 2012) schematics/board view.

        I looked through forum search results and google and was unable to find a board view file, I found a pdf of all the schematics but I don't know where the parts physically are on the board as this is my first macbook board level repair attempt.

        The macbook charger has a green light, the battery has been replaced and OS reports Normal status but Not charging. After cleaning a corroded capacitor it crumbled off the board. There...
        05-10-2024, 02:18 PM
      • twonk9098
        Macbook Pro mid 2015 battery required to boot?
        by twonk9098
        I have read many forums that state the Macbook Pro 2015 needs / does not need a battery to boot. I'm not convinced as yet which is correct.
        The Macbook Pro mid 2015 I have has no battery and do not really want to buy one just to test.
        This model has the newer trackpad which is not clickable when turned off.
        At the moment, without battery it does turn on with no display (with backlight), no chime and then turns off after 13 seconds. I see this from the power draw on my DTPS.
        If I hold the power button whilst connecting the magsafe 2 charger it turns on, again no image but...
        12-10-2024, 06:51 PM
      • Loading...
      • No more items.
      Working...