Good afternoon,
I'd appreciate help diagnosing my A2442 that's only taking 5v and 0a. Magsafe charger is not working.
PPBUS_AON (Battery unplugged) - ~12.00
Found out PP3V8_AON is short to the ground. I have feed 1V and U7700 is getting hot.
Is there any way to isolate U7700 from PP3V8_AON. Just to make sure any other component is not bad which is causing U7700 to get hot.
Thanks in advance
I'd appreciate help diagnosing my A2442 that's only taking 5v and 0a. Magsafe charger is not working.
PPBUS_AON (Battery unplugged) - ~12.00
Found out PP3V8_AON is short to the ground. I have feed 1V and U7700 is getting hot.
Is there any way to isolate U7700 from PP3V8_AON. Just to make sure any other component is not bad which is causing U7700 to get hot.
Thanks in advance

Comment