Hp ic data with markings RT5092B

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • minaedward
    Member
    • Feb 2021
    • 34
    • luxor

    #1

    Hp ic data with markings RT5092B

    Hi
    I have hp board hedwig 6050a2993001 which has an ic on it named RC5992B attached picture
    Anyone has a datasheet for it as it's not enabling the RAM voltage ic
    Thanks
    Attached Files
  • minaedward
    Member
    • Feb 2021
    • 34
    • luxor

    #2
    Anyone help me find the datasheet?

    Comment

    • mon2
      Badcaps Legend
      • Dec 2019
      • 14258
      • Canada

      #3
      For the chip with markings RT5092B?

      Comment

      • minaedward
        Member
        • Feb 2021
        • 34
        • luxor

        #4
        Originally posted by mon2
        For the chip with markings RT5092B?
        Yes please can you provide any information about it!

        Comment

        • mon2
          Badcaps Legend
          • Dec 2019
          • 14258
          • Canada

          #5
          So far, nothing available in the public for this regulator.

          Remove all power. Measure the resistance to ground of each inductor and capacitor in this region. An excessive current draw of the power rail due to a short will force the rail to shut down. Does this chip heat up more than normal?

          Comment

          • minaedward
            Member
            • Feb 2021
            • 34
            • luxor

            #6
            Originally posted by mon2
            So far, nothing available in the public for this regulator.

            Remove all power. Measure the resistance to ground of each inductor and capacitor in this region. An excessive current draw of the power rail due to a short will force the rail to shut down. Does this chip heat up more than normal?
            Ok i will do that
            No it doesn't heat

            Comment

            • SMDFlea
              Super Moderator
              • Jan 2018
              • 21022
              • UK

              #7
              Originally posted by mon2
              For the chip with markings RT5092B?
              No datasheet but it`s in the Wistron San Bernardino schematic. Which i don`t have.
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

              Comment

              • mon2
                Badcaps Legend
                • Dec 2019
                • 14258
                • Canada

                #8
                Attached.

                Click image for larger version

Name:	rt5092_1.png
Views:	264
Size:	253.3 KB
ID:	3498576

                Comment

                • minaedward
                  Member
                  • Feb 2021
                  • 34
                  • luxor

                  #9
                  Originally posted by mon2
                  Attached.

                  Click image for larger version

Name:	rt5092_1.png
Views:	264
Size:	253.3 KB
ID:	3498576
                  Thanks a million 🌹
                  You are a life saver

                  Comment

                  • tyo
                    Member
                    • Aug 2020
                    • 14
                    • indonesia

                    #10
                    RT5092B = RT5077A
                    Attached Files

                    Comment

                    Related Topics

                    Collapse

                    • welcometoo
                      acer nitro 5 AN515-55 no display / caps lock
                      by welcometoo
                      Hi brothers, please i need help diagnose acer nitro 5 no display issue.

                      model: nitro 5 an515-55
                      motherboard part number: GH51M LA-K862P Rev: 1A

                      i received this laptop with a short in power line, it was a capacitor + a mosfet on VCORE line , the laptop turned on cpu and gpu getting warm all voltages seem ok except vcc_gt but no display/caps lock activity also no hdmi out.
                      i flashed new bios also ec(ene kb9022) the same result .
                      disabled discrete graphics (rtx 3060 ) by cutting its power and shifting a resisror near pch VCC_GT comes but still the same...
                      07-05-2025, 11:11 AM
                    • howardc64
                      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                      by howardc64
                      Problem

                      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                      08-04-2024, 10:36 PM
                    • kingiii
                      Possbility of data recovery, is it true?
                      by kingiii
                      Hello, A customer told us that there is a data recovery company that can by pass IMac pro 2020 with t2 chipset GPU to get their data back, I am wondering if that is possible. GPU is shorted and Imac wont boot at all. I informed customers that data are almost impossible to be retrived, and they are upset and think we are BS them. Of course being up in Canada, people like to believe that usa will have a better solution for it, a US data recovery company they searched on google told customer that they could get the data back without needing worry about T2 chip or Imac not working all that, I do not...
                      07-02-2025, 02:29 PM
                    • mscottdoran@gmail.com
                      Can anyone identify the classification of this data signal?
                      by mscottdoran@gmail.com
                      Hi, I'm an elevator technician. The attached oscilloscope display picture is from a digital elevator hall arrival lantern data signal. We have been having problems with “ghost signals” causing intermittent hall arrival lanterns to illuminate randomly when the elevator is not actually due to arrive at the floor.

                      The tech support of the hall arrival board manufacturer (CE Electronics) is blaming the elevator controller manufacturer (MCE), and the tech support of the elevator controller blames the hall arrival board manufacturer.

                      The boards are powered by a ground referenced...
                      02-08-2025, 11:31 AM
                    • Joe24
                      Maytag Whirlpool Kenmore clothes dryer data bus
                      by Joe24
                      Patient is a Maytag/Whirlpool/Kenmore clothes dryer. Not sure of exact model, doesn't matter. All boards are out of production.

                      Specific problem is a Maytag 8544799 / WP8544799 motor-control board, aka Diehl Controls 708879-05. Customer states the board "doesn't work, motor doesn't run". Not sure how the repairman made that assessment, or if it's even accurate. He can't get replacement boards, and the owner decided to buy a new dryer, so whether this board is the problem is speculation on his part. Again, doesn't matter.

                      I've been over the board looking for...
                      01-13-2025, 06:50 PM
                    • Loading...
                    • No more items.
                    Working...