Dell 5300 2 in 1 no bootable device

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • minaedward
    Member
    • Feb 2021
    • 32
    • luxor

    #1

    Dell 5300 2 in 1 no bootable device

    Hi
    I have a Dell Latitude 5300 2 in 1 laptop that boots into this message "no bootable devices found"
    It has an nvme ssd drive installed which is tested and working fine with windows 10 installed but it does't show in BIOS at all
    I tried updating the BIOS through usb and when it restarts there is no chnage I am stuck with the same BIOS version
    Please Help
  • minaedward
    Member
    • Feb 2021
    • 32
    • luxor

    #2
    Any ideas guys 🧐

    Comment

    • mon2
      Badcaps Legend
      • Dec 2019
      • 13830
      • Canada

      #3
      See if this helps:

      Latest Dell BIOS stops firmware updates and the current workaround! - Hardware - Spiceworks Community

      Comment

      • minaedward
        Member
        • Feb 2021
        • 32
        • luxor

        #4
        Thanks for your reply
        But I already found it off
        My issue is that the Bios doesn't detect the hard drive as shown under the device information
        Attached Files

        Comment

        Related Topics

        Collapse

        • zenius
          [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
          by zenius
          Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

          Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
          12-08-2024, 06:13 AM
        • jhanra
          Dell Latitude 5400 Chromebook UEFI bios
          by jhanra
          Hi there masters, recently i got a dell 5400 chromebook and wanted to install windows, i searched the internet and i found out other people also wanting a UEFI bios for this model, i searched there is a R/W legacy, but there are bugs like keyboard/trackpad not working, and hard to install.

          so i decided to try to port one, this bios is based on dell 5400 windows version, i am testing this bios for a week now an found only a little to no bug at all in windows 10, or only a minor issue
          in windows 11 sound driver compatibility, but overall its ok, for me i can deal with it, 😅😅😅...
          11-02-2024, 04:19 AM
        • gizaha
          Dell Latitude 5580 possible bios corruption
          by gizaha
          Dell latitude 5580, motherboard cdp 80 la-e151p

          3 amber 3 white blinks. Dell website sais it's problem "bios recovery" and suggested solution "recovery image not found"
          (from here https://www.dell.com/support/manuals...e7a&lang=en-us)

          I try plugging charger while pressing ctrl+esc, machine turns on, nothing and after 20 seconds it gives 3 amber 3 white blinks again.

          Since ssd is replaced and had clean install windows, i've...
          02-13-2024, 07:18 AM
        • mrrubik
          Dell Optiplex 7010 micro bad BIOS flash?
          by mrrubik
          Hi folks,

          I got a Dell Optiplex 7010 micro PC (Exact Model) with 8FC8 BIOS and locked out admin password. I attempted to remove the password by patching the BIOS via info from this thread: https://www.badcaps.net/forum/troubl...ssword-patcher
          After flashing the patched the BIOS, the PC is unresponsive with a solid AMBER power LED (not documented in manual anywhere)

          Steps I took:
          1. Read BIOS with CH341a, verified hash twice
          2. Patched
          ...
          12-23-2024, 04:11 PM
        • bmxlovah
          Dell Precision T7910 no bios, no post after applying SAS/RAID setup
          by bmxlovah
          Hi,

          My Dell Precision T7910 died after enabling onboard SAS controller and applying RAID settings. There were no hardware changes between working and not working state, only setup (via bios -> controller settings). After applying settings and reboot PC turns on, flash leds (normally) but there's no further action, it just stays on with no graphics and no keyboard led's on. There's no Dell logo, nothing. I've tried resetting bios by jumper, replacing cpu's, replacing ram, removed/replaced cmos battery, disconnecting all drives etc. I've also dumped .bins from mobo chips SLI1 (16...
          11-24-2022, 06:29 AM
        • Loading...
        • No more items.
        Working...