HP 17-x057nf mofset completly burn no more marking

Collapse
This topic has been answered.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pc_okay
    Badcaps Veteran
    • May 2022
    • 243
    • FRANCE
    #1

    HP 17-x057nf mofset completly burn no more marking

    Hello guys,

    I can't find any shematic for this board and i have a mofset (i think) completly burn.
    I can't read the marking. :'(
    Can someone help me please with photos attached?

    Thanks !
    3 Photos
    Tags: None
    • Answer selected by pc_okay at 06-13-2024, 05:58 AM.
      Fraheeba
      New Member
      • Dec 2018
      • 9
      • Germany
      Originally posted by hamzafox
      Try 7410 mosfet
      CAUTION, rather not, the originals are P-Channel MOSFETS 7403
      Attached Files
        • Selected Answer

        Comment

        • hamzafox
          Senior Member
          • Nov 2019
          • 85
          • SYRIA
          #2
          Try 7410 mosfet
          Attached Files

            Comment

            • pc_okay
              Badcaps Veteran
              • May 2022
              • 243
              • FRANCE
              #3
              Thanks I'll test it.

                Comment

                • Fraheeba
                  New Member
                  • Dec 2018
                  • 9
                  • Germany
                  #4
                  Originally posted by hamzafox
                  Try 7410 mosfet
                  CAUTION, rather not, the originals are P-Channel MOSFETS 7403
                  Attached Files
                    • Selected Answer

                    Comment

                    • pc_okay
                      Badcaps Veteran
                      • May 2022
                      • 243
                      • FRANCE
                      #5
                      Hello !

                      Big thank you guys!
                      The mofset burn because of a bad condo on the other side of the board.
                      Now work like a cham with the new MOSFETS 7403!

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • ttmi100x
                          HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
                          by ttmi100x
                          Greetings everyone,


                          I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


                          The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
                          Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

                          Upon closer inspection...
                          "Burnt" resistor
                          6 Photos
                          07-31-2024, 06:36 PM
                        • howardc64
                          Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure
                          by howardc64
                          Eventually discovered a burn mark near lower corner of LCD. Here is a summary
                          • Backlight on, no image
                          • Disconnect right buffer board (view from front), left side display comes on
                          • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
                          • Buffer board is pretty simple
                          Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...
                          07-11-2025, 04:04 PM
                        • pc_okay
                          HP BOARD LA-H323P (Not mofset again ?!)
                          by pc_okay
                          Hello guys,

                          I quadruple check my dc mofset and they are not leaking.
                          But first one is giving me million and millions ohms in every ways (gate <> source <> drain <> gate) could it be this little b....?

                          But I get not voltage after first mofset 0V, I get 0.95V after 2nd mofset.

                          On my ic chip i get: (without battery)

                          ACN 0.91
                          ACP 0.91
                          CMNSRC 0.38
                          ACDRV 0.05
                          ACOK 0
                          ACDET 3.1
                          IOUT 0
                          SDA 0.1
                          ILIM 0
                          BATDRV 2.2
                          SRN 0
                          SRP 0
                          GND 0
                          LODRV 0
                          RGN 5....
                          10-08-2024, 08:57 AM
                        • ktmmotocross
                          Dell G15 5511 LA-K455P - new gpu fan burn SIO pwm sig. in SIO MEC1515
                          by ktmmotocross
                          Hello. Have this Dell G15 5511 la-k455p that new gpu fan burn and left pwm sig from sio with 10 ohms.
                          I read that this sio MEC1515 must be programmed, but someone says dont. My Vertyanov seems dont have this model in it.
                          Laptop works and can be tricked by split pwm, but i dont want to do this stuff this way.
                          So anyone really knows if it must be programmed?
                          09-16-2025, 07:11 AM
                        • dutchgaucho
                          Please help to identify component with marking eHFFH
                          by dutchgaucho
                          Dear BadCaps colleagues,

                          I'm working on a HP Omen 16-WF0894ND. Won't turn on. Battery is charging and 3 and 5V rails are present.
                          However, I located PU1801 that's only outputting 0.37v as soon as the power button is pressed. Weird voltage imo, although there's no short after the coil. Chip aint getting hot either. Since no diagram is available, I can't really determine what this rail is for, but I assume it might be a PCH PWR rail. Please help me to identify:

                          Chip marking eHFFH
                          Board model: LA-M783P
                          Please also see pictures attached.
                          08-28-2025, 02:41 AM
                        • Loading...
                        • No more items.
                        Working...