820-02016 DFU error 4014 - dead nand?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • luckydip
    Senior Member
    • Aug 2016
    • 165
    • uk
    #1

    820-02016 DFU error 4014 - dead nand?

    Working on a Air 820-02016, had extensive liquid damage around SPI/SOC which I hopefully sorted. Machine powers straight to DFU but when I restore get the 4014 error. Checked all the awake around NAND

    PP0V88_AWAKE_NAND, PP1V25_AWAKE_NAND, PP2V5_AWAKE_NAND all present.

    Any other power rails to check or dead NANDS? thanks​
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • mattpd
      PS5 EDM-031 - Pulsing BLOD - SSD NAND chips never heat up
      by mattpd
      PS5 died in the middle of a game and never would boot again. Pulsing BLOD stays on forever but never boots.

      No LM damage. UART gives a generic "APU not responding" error.

      Under thermal camera, the SSD NAND chips stay stone cold. The controller warms, but not the NAND. I have a good 2.5v and 1.8v around the NANDs...

      I don't have a ton of PS5 experience, but I assume that the NAND would need to warm at least a little bit in order to boot...

      So to those with experience, would you expect at least a little heat from the NAND during...
      09-02-2025, 09:42 AM
    • double_DD
      How can I be sure that my EC chip is dead?
      by double_DD
      Hi all,

      As the title suggests, how can I be sure that my EC chip is really dead?

      I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

      Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
      03-12-2025, 07:47 AM
    • tranquility
      Onkyo TX-NR809 – no hdmi, DTS or NAND chip ? stuck at starting kernel
      by tranquility
      Hello,
      i want to repair an Onkyo TX-NR809 receiver.

      symptoms:
      on power on, display appears and i hear one click. enue functions is given.
      - no hdmi output
      - audio output not tested, but i think it is not there
      - usb sticks are not recognized

      if i read out the chips with display+standby button + tone+
      both dts show only ????

      chip is D830K013BZKB4

      things i have done:
      - reflow of the dts chip without taking off and reballing
      - changed the aluminium caps without the big one with 25v because i dont...
      08-25-2025, 01:04 AM
    • sohail5307
      Need a2159 128gb nand bin file
      by sohail5307
      I have received SSD nand short A2159 macbook. I received new tsb4226 nand , but i think this is removed from iphone, I have nand programmer , if anyone have nand firmware please send me

      Two nand are using :
      Tsb4226(128gb)
      Tsb4226(128gb)
      09-16-2023, 09:20 PM
    • tech_guru
      Macbook Pro 2019 A2141 NAND Shorted
      by tech_guru
      Hello. If you could please help me understand what I am doing wrong...

      This model, Macbook Pro 2019 16" A2141, 512GB, EMC 3347, with T2 Security Chip, had 4 NAND Chips shorted in 1 wing (U9100, U9200, U9300, U9400) and it has 1 more in the 2nd wing (U8600) BUT NOT shorted. All chips are TSB4227 TOSHIBA-KIOXIA SN4192TWNA12014 BGA110 128GB. I got 4 new nand chips for 1 wing and programmed them by specific position of course with JCID P13 programmer.

      I also replaced the tps power ic for the ssd.
      Now all rails come up, including the ssd rails 0.9v, 1.8v, 2.5v....
      08-28-2025, 08:04 AM
    • Loading...
    • No more items.
    Working...