Toshiba A300D power problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rtstorm
    Badcaps Veteran
    • Feb 2012
    • 971
    • Croatia

    #1

    Toshiba A300D power problem

    Hi, i got this toshiba a300d with no display, fan spin for 2-3 sec. I thought it was the NEC/TOKIN issue, but i see there is SMD 330 smd. i can check them but i dont thik this is the problem. Does anybody have schematic for this board? it is

    DABD3GMB6EO REV E
    Attached Files
    ...the quieter you become the more you are able to hear...
  • dj_ricoh
    Badcaps Legend
    • Jan 2013
    • 2073
    • uk

    #2
    Re: Toshiba A300D power problem

    did you try a reflow?
    you know amd video card :P
    Just cook it! It's already broken.

    Comment

    • rtstorm
      Badcaps Veteran
      • Feb 2012
      • 971
      • Croatia

      #3
      Re: Toshiba A300D power problem

      just finish with the reflow, it worked. But i hate this kind of reapir, i can never be sure it will last a day, month or year. I think in this situations it is the best to put a new VGA card.
      ...the quieter you become the more you are able to hear...

      Comment

      • dj_ricoh
        Badcaps Legend
        • Jan 2013
        • 2073
        • uk

        #4
        Re: Toshiba A300D power problem

        yeee!
        use a cooper plate so you won`t see the notebook again
        Just cook it! It's already broken.

        Comment

        • rtstorm
          Badcaps Veteran
          • Feb 2012
          • 971
          • Croatia

          #5
          Re: Toshiba A300D power problem

          Trust me i will.
          ...the quieter you become the more you are able to hear...

          Comment

          • rtstorm
            Badcaps Veteran
            • Feb 2012
            • 971
            • Croatia

            #6
            Re: Toshiba A300D power problem

            just update, customer watch movie on laptop and black screen
            ...the quieter you become the more you are able to hear...

            Comment

            • lezsimply
              The Wanderer
              • Jan 2013
              • 645
              • Philippines

              #7
              Re: Toshiba A300D power problem

              Reball?

              Comment

              • alihomee
                Badcaps Legend
                • Dec 2012
                • 1565
                • malaysia

                #8
                Re: Toshiba A300D power problem

                change gpu

                Comment

                • zendalo
                  New Member
                  • Aug 2013
                  • 8
                  • Portugal

                  #9
                  Re: Toshiba A300D power problem

                  Holla there!
                  I have A300D 14E motherboard ( DABD3GMB6E0)...In that part was maybe a fuse or somethin else thats was completely fried, and the motherboard was without power or any indicator to show a life, I remove the fried component it and now is power on, tested with external monitor is working...but now I dont know is it a fuse or some another electronic component.. Need a little help

                  P:S: I saw pictures here from the same motherboard and I noted that is missing a cable that connect the down right side from the hole 43 to Hole 6( CN17 to CN5)

                  Hope 4 help..Thanks

                  Attached Files
                  Last edited by zendalo; 06-13-2015, 06:57 AM.

                  Comment

                  • Djosla
                    Badcaps Veteran
                    • Dec 2012
                    • 246
                    • Montenegro

                    #10
                    Re: Toshiba A300D power problem

                    no no no it`s not fuse it`s capacitor...big one i see,most likely on backlight power line...don`t put fuse...

                    Comment

                    • zendalo
                      New Member
                      • Aug 2013
                      • 8
                      • Portugal

                      #11
                      Re: Toshiba A300D power problem

                      Ah yeah! Crnogorac be nice and explain me which capacitor I need to put there.. The fried component was with a white colour...!
                      Daj molim te budi malo precizniji Nemam pojma iz elektronike al mogu da sredim ako dobijem instrukcije.
                      Kind regards from Macedonian in Portugal

                      Comment

                      • Agent24
                        I see dead caps
                        • Oct 2007
                        • 4913
                        • New Zealand

                        #12
                        Re: Toshiba A300D power problem

                        I guess you will need the schematic to find out what the capacitor should be

                        Edit: Think I found the schematic, see attached.

                        Check Page 20, top right for C26. Schematic says 10u/25V_1206
                        Attached Files
                        Last edited by Agent24; 06-15-2015, 05:04 PM.
                        "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                        -David VanHorn

                        Comment

                        • Djosla
                          Badcaps Veteran
                          • Dec 2012
                          • 246
                          • Montenegro

                          #13
                          Re: Toshiba A300D power problem

                          yes it is 10u/25V...i did not have schematics before...thanks to agent24

                          Comment

                          • zendalo
                            New Member
                            • Aug 2013
                            • 8
                            • Portugal

                            #14
                            Re: Toshiba A300D power problem

                            Many many thanks ! I ll upload photo when theToshiba will be ready...
                            Tnx Agent 24, hvala lijepo Dj osla

                            Comment

                            Related Topics

                            Collapse

                            • theone111
                              Problem with LG Plasma 60PM6700 - Random power downs
                              by theone111
                              I have an LG Plasma TV 60PM6700 for the past ~12 years.

                              In the last ~3-4 months I have been having some issues.
                              1. Problem: It started with random picture disappearing (sound still worked).
                                Frequency: Happened about once a week.
                                Solution: Had to turn off TV wait a few seconds before turning it on again.
                              2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                                Frequency: Happened about once a week.
                                Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                              3. Problem: TV shuts down
                              ...
                              07-22-2024, 10:36 AM
                            • Duranitron
                              Asus x512dk rev 2.1 power on problem
                              by Duranitron
                              When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

                              Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
                              11-26-2024, 10:22 PM
                            • EazyBone
                              LG OLED55C9PUA power problem
                              by EazyBone
                              Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.

                              Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.

                              I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.

                              The power supply to t con is different story.
                              This...
                              06-23-2023, 07:43 AM
                            • Dr.d
                              Help please..Lenovo ideapad 5 14itl05 power and charging problem
                              by Dr.d
                              I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

                              Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
                              04-05-2024, 11:48 AM
                            • sam_sam_sam
                              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                              by sam_sam_sam
                              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                              03-31-2024, 02:12 PM
                            • Loading...
                            • No more items.
                            Working...