hp mini 110 stuck in hp logo only...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zen81788
    Member
    • May 2012
    • 11
    • philippines
    #1

    hp mini 110 stuck in hp logo only...

    i have a problem with my hp mini 110....
    everytime i turn on my netbook it shows only an hp logo...sometimes it shows a POST and has a message "CMOS checksum bad"..
    i reflowed the GPU and even a on board processor and nothing change...
    is my bios chip has a problem?
    pls, help...thanks in advance techies,,.....
    Tags: None
    • pctek
      Senior Member
      • Apr 2012
      • 53
      • Greece
      #2
      Re: hp mini 110 stuck in hp logo only...

      Maybe a bios update or a cmos battery replacement would solve your problem .

        Comment

        • zen81788
          Member
          • May 2012
          • 11
          • philippines
          #3
          Re: hp mini 110 stuck in hp logo only...

          i did it so far sir...but nothing happens...any idea?

            Comment

            • pctek
              Senior Member
              • Apr 2012
              • 53
              • Greece
              #4
              Re: hp mini 110 stuck in hp logo only...

              Was the battery brand new or used ? Maybe try an older version of bios .I read somewhere that someone disconnected the camera and it booted normally .

                Comment

                • marcellodj
                  Senior Member
                  • Nov 2010
                  • 99
                  #5
                  Re: hp mini 110 stuck in hp logo only...

                  try disconnect webcam cable.

                    Comment

                    • zen81788
                      Member
                      • May 2012
                      • 11
                      • philippines
                      #6
                      Re: hp mini 110 stuck in hp logo only...

                      i read somewhere in the internet that i need to debug my bios chip, or shorting otherwise....but how?

                        Comment

                        • abhiswn
                          New Member
                          • Jun 2014
                          • 1
                          • india
                          #7
                          Re: hp mini 110 stuck in hp logo only...

                          voila!!! its work

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • x_orange90_x
                              Vizio V555-G1 stuck on wallpaper; now stuck on V logo
                              by x_orange90_x
                              I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
                              12-28-2023, 06:26 AM
                            • G33RT
                              Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                              by G33RT
                              Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                              It does power up when pressing the power button.

                              I already try the power button while plugin the plug with no result.
                              Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                              Could this be an PSU or eMMC issue ?
                              07-19-2025, 03:43 AM
                            • justice171
                              JVC LT-50N795 Stuck on Wisdom Share Logo
                              by justice171
                              Hi everyone,

                              I'm working on a JVC TV for a client that's stuck on the "Wisdom Share" logo screen.

                              It's a model LT-50N795 with a board number TP.HV510.PC822. I attempted a firmware update via USB, and while the upgrade was completed successfully, the TV is still stuck on the Wisdom Share screen on reboot.

                              Has anyone encountered this issue before, or does anyone have any suggestions on possible solutions?

                              Thanks in advance!
                              ​...
                              11-04-2024, 02:55 AM
                            • mr.Data
                              Macbook A1990 stuck on logo
                              by mr.Data
                              Hello,

                              This Macbook Pro 2018 boots up and then gets stuck on the logo.
                              All the normal methods of resetting this Macbook have been tried but do not work.
                              I cannot get into recovery mode and there is no bar displaying, it's just the white logo on a black background.

                              Any help would be greatly appriciated....
                              04-18-2024, 11:51 PM
                            • platinumsteel
                              Macbook Air 2015 Booting Very Slow and Stuck on apple Logo 99%
                              by platinumsteel
                              Hi guys i have my personal MacBook Pro 2015 820-00165 board that was working fine for more than a year and one day stopped working on my original Magsafe charger. It was turning on with my bench power supply. Opened it up and while diagnosing that somehow i ended up with a shorted smc.The line which was shorted was SMC_PM_G2_EN. I removed the SMC and short was gone. So all I had was another working donor board 820-3435 which i used to program it's SMC to 820-00165 using the SMCTOOL By MuertoGB.Took that SMC and use it on my 820-00165 board .And my board started working again. PPBUS_G3H 8.56V....
                              1 Photo
                              03-18-2024, 05:16 PM
                            • Loading...
                            • No more items.
                            Working...