Hello I am looking for the firmware update the device starts
is in bootloop, no buttons work anymore
until the battery runs out
is in bootloop, no buttons work anymore
until the battery runs out
-
-
Re: denver Taq 10153MK2 firmware Update
how does that help?
you need to get it into recovery or fastboot mode.
that needs the power and volume buttons working -
Re: denver Taq 10153MK2 firmware Update
Unfortunately the buttons don't work eitherComment
-
Re: denver Taq 10153MK2 firmware Update
so if you disconnect the battery, then reconnect - does it turn on without the power button?Comment
-
Re: denver Taq 10153MK2 firmware Update
That's an android tablet? First I'd try something like a factory default or disconnecting the battery for a bit and then try again.Comment
-
Re: denver Taq 10153MK2 firmware Update
Yes, I had disconnected the battery and had the same problem
I haven't tried without the power button yet
Yes this is an Android tablet that isComment
-
Re: denver Taq 10153MK2 firmware Update
https://denver.eu/consumer-support/upgrades-firmware/
All upgrades & firmware are placed (if available) under each product.
Quote:
Please notice - tablet firmware are never placed on the website - if you need firmware for your tablet (we typically only have the same as there are on already, so only if it gives you problems) please write to us with modelnumber, PO/Serial number, and then we can send the correct firmware to you. Our contact info are: support.hq@denver.eu
Please use the search field above this message. Here you can write the model number, and it will show you both the product itself, user manuals, high resolution photos + if there are updates available for the model.
.Comment
-
Re: denver Taq 10153MK2 firmware Update
Good day
I have already written an email, I have to waitComment
-
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help... -
Lenovo System Update offered me an update for the firmware of the Folio keyboard for my X12 Detachable Gen 1. The update got stuck and after 20 minutes I switched off the laptop. Since then, the keyboard and touchpad have been without function. Does anyone know how I can revive it?10-24-2024, 08:59 AM -
Diagnosed this TV as having a failed main board which I've replaced with one from a KDL 55HX850. They are (supposedly) the same board.
Being 'Smart TV' it requires a firmware reboot when you swap out boards such as T-Con or main board. It starts with a black screen and flashing yellow and green LEDS, indicating it needs that firmware boot. The procedure described all over the web is to put the software into the root directory of a FAT32 formatted USB drive and it should load that up once plugged into USB1 port. But not for me. I can see the LED on the USB chip flash for about... -
Infineon TPM firmware update files:
Infineon_firmware_update.zip
...Code:TPM12_4.32.879.0_to_TPM12_4.34.1010.2.BIN TPM12_4.33.949.0_to_TPM12_4.34.1010.2.BIN TPM12_4.40.119.0_to_TPM12_4.43.257.0.BIN TPM12_4.40.119.0_to_TPM12_4.43.258.0.BIN TPM12_4.40.119.0_to_TPM12_4.43.259.0.BIN TPM12_4.40.119.0_to_TPM20_5.62.3126.0.BIN TPM12_4.40.119.0_to_TPM20_5.63.3144.0.BIN TPM12_4.40.119.0_to_TPM20_5.63.3353.0.BIN TPM12_4.42.132.0_to_TPM12_4.43.257.0.BIN TPM12_4.42.132.0_to_TPM12_4.43.258.0.BIN TPM12_4.42.132.0_to_TPM12_4.43.259.0.BIN
10-25-2025, 10:09 AM -
Does anyone happen to have the latest firmware for the NR1508? Marantz took their update server down and customer support refuses to provide the image to flash over USB.
Regards
Comment