the original 3v controller ic from motherboard is SY8288BRA...I found replacement with code SY8288BAC, but i just get info from someone he said that BAC is only for 5v controller...is that right?
can replace controller ic SY8288BRA with SY8288BAC?
Collapse
X
-
Re: can replace controller ic SY8288BRA with SY8288BAC?
It's NOT SY8288BAC but SY8288CRAC
BACxxx=SY8288CRAC
That "someone" is telling you the truth. You must buy SY8288BRAC
.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Re: can replace controller ic SY8288BRA with SY8288BAC?
You're welcome.
The chip marking of the SY8288BRAC must be BABxxx.
Edit:
IC Marking Codes and Datasheets
https://www.badcaps.net/forum/showth...23#post1004423
Silergy
https://www.badcaps.net/forum/showpo...1&postcount=12
.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Silergy
SY8288CRAC (BAC)=SY8288CRAC, SY8288C, BAC7GC, BAC7LN, BAC5KA, BAC6GB, BACXXX.BAC7LN BAC5CU BAC6DC Silergy integrated circuits starting with BAC are SY8288CRAC and are compatible with each other.
​SY8288BRAC (BAB)=SY8288BRAC, SY8288B, SY8288, BAB5ZA, BAB5ZD.BABXX Silergy integrated circuits starting with BAB are SY8288BRAC and are compatible with each other.Comment
Related Topics
Collapse
-
by Mini1Hey. I have a Fujitsu U757 motherboard with number CP732277. And i want to replace it with U758 motherboard like with CP755900 or whatever U758 series motherboard. U747/U757(7th gen CPU) all motherboards look exactly same so i'm sure it won't matter which one to use. But i would like to upgrade a bit and get U748/U758(8th gen CPU) motherboard. Motherboards all look exactly same layout as U747/U757, but i found one chip is soldered on U747/U757 which U748/U758 doesn't have. It is STM32F103 MCU which is near screen connector. And i'm not sure will U748/U758 motherboard will work with my U757 laptop....2 Photos01-28-2024, 05:01 PM
-
by acedogblastThis is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
by NotEnoughHello everyone,
I'm working on a repair for my Dell G15 motherboard (model GDL5L) and need two specific ICs to restore the functionality of the Embedded LED Controller (ELC). The missing components are labeled as UEL1 and UEL2 in the schematic, and they're both critical for LED control and system signaling. Here are the details:
1. UEL1
• Part Number: SA0000AWJ70
• Model: STM32F070CBT6TR_LQFP48_7X7
• Function: This microcontroller manages system signaling, power management, and SPI... -
by harpI have RX26PG2 graphic card with incomplete original heatsink, only aluminium plate... but in original solution it look like such bad termal design that I asking if is proper fanless heatsink be adequate replacement ot better... what you think? Till powering on, it is propper hot......
-
Channel: General Computer & Tech Discussion
-
-
by glovecapsHello,
I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.
My question is, can I update the Bios on this G733 motherboard to a G533 Bios.
The reason for wanting to do this is that the keyboard isn't working as it should, and I think this... - Loading...
- No more items.
Comment