Macbook Pro 13" M1 Reboots every 30 seconds

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • roxboy1984
    Senior Member
    • Jan 2022
    • 177
    • South Africa
    #1

    Macbook Pro 13" M1 Reboots every 30 seconds

    Hi,

    I wonder if anyone can assist. I have a macbook pro 13" M1 that had some liquid spilled on it. I have taken everything apart and cleaned with Isopryl and now the machine turns on but after about 30 seconds it will just shut off and start again. There is generally a pink screen that flashes just before it reboots.

    Anyone perhaps have any suggestions on what i can test or might need to replace?
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • envym
      MacBook Pro 2018 with Activation Lock
      by envym
      Hi everyone!

      I have a 2018 MacBook Pro (with Sequoia OS) that I've been using for years with no problem. I recently received an M2 MacBook Pro so I'm mostly using it and not the 2018 one, but since a friend of mine needs a computer, I thought I could restore my 2018 and give it brand-new-like to my friend.

      I tried using the built-in tool to restore the MacBook (Settings > General > Transfer or restore > Delete) but it got stuck when trying to remove the Find Device configuration (it asked me for the password for my old Apple ID -now I use the same account but...
      06-27-2025, 08:54 AM
    • modtool
      Macbook Pro A1989 fallen, reboots if touchbar connected
      by modtool
      Hi to all,
      the owner of this macbook brought it to me after a fall, that hit the upper right corner of the top case.
      Luckily enough, the screen and all other parts of the machine haven't been damaged, only the touch bar wasn't lighting up anymore, and the macbook began to behave strangely, because it seems to start and work fine but suddendly it shutsdown (and at the same time the fans make a high rotation for half a second, as if an animal was annoyed by something...) at random times, sometimes after 2 minutes, sometimes after 5 minutes, but never over 10 minutes, then restarts...
      11-10-2023, 07:42 AM
    • AlexVG
      Macbook A1466 820-00165 resets every 10 seconds
      by AlexVG
      Hi,
      It have had a problem with U7100 and short circuit in Q7130.
      I replaced them.


      It starts now and waiting 20 seconds and then starts to reset PM_SLP_S4_L every 10 seconds.
      Almost all voltages rising
      except U3090 and U3210 (LED) - not receives enable signal.

      U4500 is trying to rise - receives enable only 2-3 seconds

      Here is my measuring of important signals.

      What else could be the problem?



      I need to help.
      Thank you an advance....
      11-09-2023, 07:19 AM
    • MullySculder
      A1989 EMC3214 can't boot to USB drives due to T2 but SSD can't be initialized and Macbook freezes then reboots in recovery
      by MullySculder
      Hey folks, I'm working a 2018 13" Macbook Pro that I can't get to install an OS on.

      This was given to me by a friend who told me I could have it, if I fixed it.

      I've noticed a couple of dents on the laptop case and the touch bar doesn't have any activity lights when first turning on. When I boot up the machine, it gives a folder with a question mark. When I do eventually get to internet recovery with High Sierra, I can go to Disk Utility but I'll get errors when I try to erase the 512GB SSD. First Aid comes back with no issues. But if you linger too long on anything,...
      07-10-2024, 02:17 AM
    • SarcasticOP
      General question about MacBook power rails for repair.
      by SarcasticOP
      I am looking at an A2337 and found this for the order of power rails and what they do. Can this be confirmed before I dive into hunting down power rails that do not exist or are not neccisary?
      • PPBUS_G3H (12.6V-12.8V)
        • This is the main power rail that supplies power to the entire system. Check this rail first, as it must be present for other power rails to work.
      • PP3V42_G3H (3.42V)
        • This power rail is derived from PPBUS_G3H and is used to power the SMC (System Management Controller) and other essential circuits. It should be present if PPBUS_G3H is working correctly.
      • PPVRTC_G3H (3.3V)
        • This
      ...
      12-12-2024, 05:50 PM
    • Loading...
    • No more items.
    Working...