decorflame ndf-68n electric fireplace

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tonytiger
    Senior Member
    • Jan 2010
    • 163
    • canada
    #1

    decorflame ndf-68n electric fireplace

    hi,is there anybody that have a shematic of this electric fireplace (decorflame)and insert is a ndf-68n

    it was brought to me all wire un-hook and a burn motor,so now i have the new motor but there are no diagram in it and i don't want to burn anything....

    so in this unit there a -
    -on/off switch
    -750 watts
    -1500 watts
    -temperature control
    -dimmer control
    -element/1 termal fuse
    -motor
    -small board with 5 wires that are all connect direct to dimmer switch,light and power.

    so if someone could give me a diagram even a drawing i would appreciat very much.
    Attached Files
    Tags: None
    • sam_sam_sam
      Badcaps Legend
      • Jul 2011
      • 6041
      • USA
      #2
      Re: decorflame ndf-68n electric fireplace

      Show the data plata of your new motor in a photo and photo of the old motor

      Please make sure that when you enlarge the photo you can still read the data
      Thanks

      I might be able to help if I have this information

        Comment

        Previous template Next

        Related Topics

        Collapse
        • SolomonMan
          Electric Motor Question....
          by SolomonMan
          All,
          Yesterday in the morning the fan was fine. Its approximately 10 years old. Its one of those high Velocity types.

          In the afternoon I noticed it was not running any longer.

          During the investigation, I confirmed the wiring, confirmed the 3 way switch is fine, the Capacitor measures the correct Microfarads. So I went to the Motor;

          No smell of burnt and it spins very easily. I started to measured the continuity between the 6 wires.

          I have included a diagram from a YouTube video I found but basically the wiring is identical. The only exception...
          10-29-2023, 08:02 AM
        • freakytiki4u
          Question about a fuse from an electric fireplace
          by freakytiki4u
          I am trying to fix my sisters electric fireplace (you know the ones with fake flames). It gets no power whatsoever! I removed the main board and I seen a fuse that says "T2A 250V" on it. Its the kind that solders into the board. My question is this: Is this a slow blow fuse? I would imagine it is due to it being in a heater but I needed to be sure before I order some from Amazon. Thanks for any info. Pics attached....
          12-12-2022, 06:31 PM
        • juergenb
          Nescafe Aeroccino, still fails with new Motor (red flashes only once)
          by juergenb
          Hi,

          i am asking for some Help.
          I have one of these Nescafe Aeroccino (Milk Frother) things with a bad motor.
          The Motor didn´t start anymore and internet is full of users just swapping the motor for a Mabuchi RF-500TB-12560.
          So i got a few of these from Banggood.

          I swapped the motor and now i have a new fault condition.

          In a working Frother you would press the start button, it will light red and work for a few minutes.
          If you press longer it will light blue and just mixup the milk.

          With the new Motor it just starts...
          03-23-2021, 11:24 AM
        • sbt123
          charnwood w821 mini wood lathe motor problem
          by sbt123
          hi there,im having a look at repairing a wood lathe for my dad,(charnwood w821)the problem is when turning up the variable speed control,the motor starts to stop and start by itself,if i continue to turn up the speed it will trip the mcb in the consumer unit,there is also a slight smell of burning from the speed controll box.,Another strange symptom is the lathe can be unplugged from the mains after switching it off and the motor will spin a couple of times by itself,so far ive put a new speed controll potentiometer on and new motor brushes,ive also tested the motor windings and everything looks...
          10-27-2024, 03:43 AM
        • BOSCHNJAK
          by BOSCHNJAK
          ABOUT ME INTRODUCTION FILE

          2          024 BEV, BIH, SARAJEVO START PROJECT: ELECTRIC VEHICLE TOYOTA 4 RUNNER CONVERSION http://www.bev.ba/TOYOTA4RUNNER/index.html
          2023 BEV, BIH, SARAJEVO START PROJECT: SECRETS AND MANUFACTURING PLANS (AS MY REPLICA) OF THE LIBERTY ENGINE 2.0.
          2022 BEV, PROJECT ?
          2021 BEV, PROJECT ?
          2020 BEV,BiH, Sarajevo: PROJECT IS: HOW TO SWITCH OFF PERMANENT MAGNET FIELD and HOW TO SWITCH ON PERMANENT MAGNET FIELD?
          2019 BEV, Croatia, Ston:, Broce: PROJECT - PROJEKT ELEKTRIČNI GLISER http://www.bev.ba/ELEKTRICNIVANBRODSKIMOTOR/indexHR.htm...
          12-28-2023, 02:09 PM
        • Loading...
        • No more items.
        Working...