Re: need eeprom haier 55e3500b
hi guys,im still looking for a eeprom for a haier 55e3500b on a ms33930-zc01-01 board,kind off hard to get,all help will be very appreciated.thank you
tonytiger
Senior Member
Last Activity: 10-16-2023, 10:10 PM
Joined: 01-13-2010
Location: edmundston,nb
-
Aquatec Orca 84/13 BS IMH need info on this part
hi guys,i been looking around to find this part number but find diferent info and kind of getting confuse....can you tell me exactly what part it is and with what can i replace it with.(a1772) on 1st photo you see the burn part that seem to be a power mosfet.... -
wilson pcs 824-894 cell booster with no power
hi guys,not sure if this is the right place for this question....i have a cell wilson booster and one day no more power on it,power plug ok,so im don't know if there is a place i could find a shema or diagram for this unit...and not sur how to check this kind of fuse on the board since they seem to have 4 legs+ any help will be appreciated,thank you. model is wilson pcs 824-894... -
need eeprom haier 55e3500b
hi,im looking for the eeprom for a haier 55e3500bLeave a comment:
-
Re: need info or replacement
thanks for the reply,thanks for info,i will check this out.Leave a comment:
-
need info or replacement
hi,i need some info on this part,i beleve it is a capacitor but not sure how to look for a part replacement...or a good place to order,thank you.... -
Re: Eeprom dump thread!
hi,im looking for a eeprom for rca 32'' rlded3258a-c canada, panel is cn32b22aLeave a comment:
-
Re: CH341A programmer
thanks for replying,at lease now i have a starting point.i will order some 25Q64 and start testing.thank you.Leave a comment:
-
CH341A programmer
hi,guys.
trying to find more info on this usb ch341a programmer....what 8 pin blank eeprom is the best or universal for tv programming....there is so many kinds that i don't know witch is the best...and yes im just starting with trying to program my own eeprom since im in the tv repair business and it starting to cost money and time of shipping to finish the job.so if i could program them myself it would save a lot of time waiting for part to arrive.so my questionne is:
-is this programmer ok or sould have something else
-is the a standard 8 pin eeprom for... -
need help to know what is the ohm of this switch
hi,guys.
this is a volume pot inside of a tc-helicon voicelive touch 2....'ve been trying to find a diagram but did not have any luck....and nobody can tell me what switch i need to replace the original one....so far i tryed a P110KV1-1F15BR100K(100 ohm)
from digi-key and i need to put it at 3/4 before starting to have volume.... there is no other numbers on this switch other that the one you see on top...can someone tell me what im missing or what other switch i could try.thank you.... -
Re: peavey xr1212
hi guy's sorry for late info but like you asked here are the peavey shematic that peavey send me....Leave a comment:
-
Re: peavey xr1212
thanks for the info,i will do as you told me to check.and yes peavey send me all schematics for this units,i let you know my progress.Leave a comment:
-
Re: peavey xr1212
i tryed,but never got a reply.....will try againLeave a comment:
-
peavey xr1212
hi guy's im looking for a service manual for this peavey xr1212 mixer....
i have 2 parts that are burn and would like to replace them but cannot see info on them.....location is q3 and q4
so basicly,when client brought me this mixer,he have already took out these 2 parts....and what he told me is that the mixer have power but no light or disply,ect...but that the powerboard come very hot and start smelling like burning.....
so i kind of need these parts to make further test.any help would be very nice.thank you... -
Re: tire car balancer
thank you very much for all these info,will check all of this and let you guys know.very good info you gave me,thank you very much all of you.Leave a comment:
-
tire car balancer
hi guys,a client just brought me this power board,and since the ceramic capacitor is all burn im not sur what i could install there to replace it.....any ideal out there....it is red and big like a 5 cents and there is nothing written on it(burn and gone) i know it is on a 230vac and it is j2.any help will be very appreciated,thank you... -
optima op-312 scale
hi guys.
my client brought me this commercial scale for moose,dear.ect.....
the guy was so happy with is moose that he did not let time for scale to be move before he move his truck forwared and bring everything down.
now i been looking for days on internet,asked compagnie for help but did not find or received nothing......i can't beleve there are no diagram or scematik of this scale.
any help would be very grateful....
so if you workrd on one of these or have a diagram,ect....please let me know.... -
jvc mx-ga77 sound problem
hi guys,i have a stereo jvc mx-ga77 that came in shop today and problem is sound is like robot talking.....i have left and right speakers working so i guess it is not the outputs that is not working...setting try everything that i could see or read in manual....no i have no ideal what could cause this robotic sound.any help is more than appreciated. -
Re: wfco power converter 8855 in camper
hi sorry this projet is taking me time since i don't work on it very much.but R_J i have no ideal of what was connected on cn2(client just brought it like that)i was hoping it would be a switch or something like that since i do not have voltage on u5 so i will be checking u6 tonight but don't have much hope....thanks for the help.i will take anything to finish this job.Leave a comment:
-
Re: wfco power converter 8855 in camper
i put a 12 volt car battery as a load and before i tested voltage on car battery and it was 12.80 and want i connected ac power there is still 12.80 vdc no climing up...the 2 big ceramic resistor do comme hot,fan not turning on,and the big heat sink don't even warm up,stay cold.the client brought me this unit as is,even him don't remember why these wires where loose.and i did check the cap by taking them out and tested with a meter,they where less than 5 to 10% off the normal rate.and yes only one cap on 12vdc side....but i will re-do a second...Leave a comment:
No activity results to display
Leave a comment: