Thank you for your reply,heres a video of what the lathe is doing,.please note this is not the same make or model of lathe i have,,but the symptoms are exactly the same,also i have checked bearing which all seem ok,and you can spin the motor freely,i also have noted that the motor does not get hot after the power trips not even slightly warm.
[URL="https://www.reddit.com/r/Tools/comments/vzkv4b/any_idea_why_this_mini_lathe_motor_pulses_like/"]Any idea why this mini lathe motor pulses like this? Is there a fix? : r/Tools[/URL]​Thank you for your reply,heres a video of what the lathe

hi there,im having a look at repairing a wood lathe for my dad,(charnwood w821)the problem is when turning up the variable speed control,the motor starts to stop and start by itself,if i continue to turn up the speed it will trip the mcb in the consumer unit,there is also a slight smell of burning from the speed controll box.,Another strange symptom is the lathe can be unplugged from the mains after switching it off and the motor will spin a couple of times by itself,so far ive put a new speed controll potentiometer on and new motor brushes,ive also tested the motor windings and everything looks...

Re: ferguson/cello f5820rts4k stuck on smart tv logo

Problem solved, cello sent me an update on usb stick ,,everything working again,very good service from cello.

Re: ferguson/cello f5820rts4k stuck on smart tv logo

thanks for the reply ,,ive contacted cello,and they are sending me an update on usb,so ill report back when i have tried it

Hi there ,i have the above tv and it will not get beyond the smart tv logo ,the led in the corner of tv is also flashing red and green constantly,all buttons on remote and side of tv are unresposive.
Thank you.

Re: Bush dled40fhds no backlight

quick update ,,all back together fixed and working now,i reluctantly stripped it down lol,luckily as 2 other members suggested itwas indeed just one of the connectors to one of the strips of leds not making contact just put a tiny amount of solder on the pcb contacts,and all leds working again.
Thank you for your help.

Re: Bush dled40fhds no backlight

thanks for your reply,yes i have stripped down a tv to replace the leds before,but vowed never to bother again,what a pain.lol
Im afraid i dont have an led tester.

hello all,could some please offer some advice,on the above tv,when switched on there is image on screen (with torch shining at an angle at the screen),but no backlight,i ave checked voltage at the led pins on the power supply as the set is switched on,it starts around 48v then slowly drops to zero,the power supply is a vestel ips12.
Thank you.

Re: New Members - please post your introductions here

hello everyone,thanks for my acceptance to the badcaps forum.